background image

 -3-

CUTTING (SELF VACUUM)

N   G

O K

N   G

Surely close the Main Unit and tighten the Knob Bolt.
Confirm NO opening at the back side.

N   G

N   G

CUTTING

DIRECTION

Rotating direction

Surely connect [b] Dust Bag to the duct,
then turn the Grinder on and start cutting.
Dust Bag should be emptied with every 3m of cutting.
[CAUTION]
1. Confirm the direction of cutting and Blade rotation.
2. Keep NO gap between the material, otherwise the
   dust should leak out from the bottom.
3. Keep closing the Base, otherwise the dust should
   leak out from the opening.
4. Do NOT use worn-out blade, otherwise the dust
   collection performance should be dropped off.
5. Confirm that the fastener of the Dust Bag is
   securely closed.
6. Do NOT wash the Dust Bag.

[b] Dust Bag

Insert deeply

Duct

Base

CUTTING

DIRECTION

Rotating direction

CUTTING (WITH CLEANER)

Surely connect Cleaner Hose to the duct of Main Unit,
then turn Grinder/Cleaner on and start cutting.

[CAUTION]
1. Confirm the direction of cutting and Blade
   rotation.
2. Keep NO gap between the material, otherwise
   the dust should leak out from the bottom.
3. Do NOT use worn-out blade, otherwise the
   dust collection performance should be drop off.
4. Use proper adapter between Duct and Hose.
   (Duct diameter : 34mm )

Close

Knob Bolt

Duct

Содержание Tornado NK-125

Страница 1: ...ate p Flat Screw q Wrench r Setscrew PREPARATION WARNING Guard SW Take the Guard off Remove the Screws Turn the Grinder Body to locate the SW upper position Tighten the Screws CONNECTER INSTALLATION c B Connecter d M Connecter e H Connecter a Main Unit f M4 Screw g Cup Washer Choose the proper connecter and fit it to a Main Unit with f M4 Screw and g Cup Washer Be sure to turn off the disc grinder...

Страница 2: ...t the Blade on m Base Flange 5 Set the Wheel Nut on the Blade Be care of the direction of Wheel Nut 6 Fix the spindle and tighten the Wheel Nut 7 Confirm NO contact between the Blade and inner area of the Main Unit Spindle Knob Bolt WARNING Make sure TORNADO is securely attached otherwise it may come loose causing injury Wheel Nut direction BOSCH OTHERS a Main Unit GWS8 115 GWS8 125 GWS9 125 GWS10...

Страница 3: ...from the opening 4 Do NOT use worn out blade otherwise the dust collection performance should be dropped off 5 Confirm that the fastener of the Dust Bag is securely closed 6 Do NOT wash the Dust Bag b Dust Bag Insert deeply Duct Base CUTTING DIRECTION Rotating direction CUTTING WITH CLEANER Surely connect Cleaner Hose to the duct of Main Unit then turn Grinder Cleaner on and start cutting CAUTION ...

Страница 4: ... projecting of Gear Case of the Grinder beyond the bottom surface 1 Complete the installation of Grinder and Blade 2 Loosen the Knob Bolt 3 Set the Main Unit on n Foot Plate 4 Tighten Knob Bolt 5 Tighten p Flat Screws from the bottom surface with the Front Guide matched with the groove of the Foot Plate CAUTION Blade Change and Depth Adjustment is impossible when using with Foot Plate Connect Dust...

Отзывы: