DEPTH ADJUSTMENT
Base Line
Scale
Knob Bolt
Cut Depth
1. Loosen the Knob Bolt.
2. Set the Base line with the Scale line of
requiring cut depth.
3. Tighten the Knob Bolt.
[CAUTION]
(1) Surely connect with Cleaner, otherwise the
dust can not be collected.
(2) Use the scale just for a reference.
Base
FOOT PLATE INSTALLATION
*G13SB3/SE2 need [n] Foot Plate to offset the
projecting of Gear Case of the Grinder beyond
the bottom surface.
1. Complete the installation of Grinder and Blade.
2. Loosen the Knob Bolt.
3. Set the Main Unit on [n] Foot Plate.
4. Tighten Knob Bolt.
5. Tighten [p] Flat Screws from the bottom
surface, with the Front Guide matched with
the groove of the Foot Plate.
[CAUTION]
Blade Change and Depth Adjustment is
impossible when using with Foot Plate.
Connect Dust Bag or Cleaner to the duct.
T-Guide (Bar 12 x 3) is adaptable.
*T-Guide : Optional.
T-Guide
Knob Bolt
[p] Flat Screw
[n] Foot Plate
groove
Front Guide
Gear Case
-4-
