Woodstock SHOP FOX W1687 Скачать руководство пользователя

Страница: 1 / 45

Model W1687

***IMPORTANT UPDATE***

Applies to Models Mfd. Since 10/14

Phone #: (360) 734-3482 • Tech Support: [email protected] • Web: www.shopfox.biz

READ THIS FIRST

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in Taiwan

#16840AW

We made the following changes to this machine since the manual was printed:

• This model has been upgraded to plastic lower bags and 2.5 micron fabric upper bags.

Aside from the information contained in this update, all other content in the owner's manual is

applicable and MUST be read and understood for your own safety.

IMPORTANT: Keep this update with the owner's manual for future reference

If you have any further

questions, contact our Technical Support.

35V2

30V2

Updated Parts

REF PART #

DESCRIPTION

30V2 X1687030V2

LOWER BAG (PLASTIC) V2.10.14

35V2 X1687035V2

UPPER BAG (2.5 MICRON) V2.10.14

Содержание SHOP FOX W1687














































Результаты поиска

Содержание SHOP FOX W1687

Отзывы:

Похожие инструкции для SHOP FOX W1687

Бренды по названию

Популярные бренды

Woodstock SHOP FOX W1687, Руководство пользователя

Результаты поиска

Содержание SHOP FOX W1687

Отзывы:

Похожие инструкции для SHOP FOX W1687

Бренды по названию

Популярные бренды