V20 iQ20 CUBE+
32
TL211-01-00-00
05-11-2018
Italiano - English
11.10 UTILIZZO MACCHINA CON ANEMOMETRO
– MACHINE USE WITH ANEMOMETER
Prima di utilizzare la macchina verificare che
l’anemometro sia in posizione verticale; fare
riferimento al
paragrafo
11.1.3
.
Before using the machine check that the
anemometer is in vertical position; refer to
chapter 11.1.3.
L
’anemometro controlla la velocità del vento
tramite il pannello di controllo GTL01.
The anemometer controls the wind speed by
the GTL01 control panel.
La soglia è impostata della casa produttrice.
The threshold is set by the manufacturer.
110 km/h (V20
– iQ20)
80 km/h (CUBE+)
110 km/h (V20
– iQ20)
80 km/h (CUBE+)
Superata tale soglia, dopo 5 secondi il palo
telescopico scende automaticamente.
when this threshold is exceeded, after 5
seconds the telescopic mast goes down
automatically.
ATTENZIONE:
Quando il selettore (2)
è in posizione “0”, il
palo scende automaticamente.
WARNING:
W
hen the selector (2) is in the “0” position
the mast goes down automatically.