Geneko GWR High Speed Router Series, Руководство пользователя

Страница: 100 / 133

User Manual
Geneko GWR High Speed Router Series
100
IPSec Tunnel configuration between GWR-HS Router and Cisco Router
IPSec tunnel is a type of a VPN tunnels with a secure tunneling method. On the diagram below Error!
Reference source not found. is illustrated simple network with GWR-HS Router and Cisco Router. Idea is to create
IPSec tunnel for LAN to LAN (site to site) connectivity.
Figure 92 – IPSec tunnel between GWR-HS Router and Cisco Router
The GWR-HS Routers requirements:
•
Static IP WAN address for tunnel source and tunnel destination address,
•
Dynamic IP WAN address must be mapped to hostname with DynDNS service (for synchronization with
DynDNS server SIM card must have internet access).
GSM/UMTS APN Type: For GSM/UMTS networks GWR-HS Router connections may require a Custom APN. A
Custom APN allows for various IP addressing options, particularly static IP addresses, which are needed for most
VPN connections. A custom APN should also support mobile terminated data that may be required in most site–to–
site VPNs.
The GWR-HS Router configuration:
•
Click
Network
Tab, to open the LAN NETWORK screen. Use this screen to configure LAN TCP/IP settings.
Configure IP address and Netmask.
•
IP Address: 192.168.10.1,
•
Subnet Mask: 255.255.255.0.
Press Save to accept the changes.
Figure 93 – Network configuration page for GWR-HS Router