Geneko GWR High Speed Router Series, Руководство пользователя

Страница: 62 / 133

User Manual
Geneko GWR High Speed Router Series
62
SMS – SMS Remote Control
SMS remote control feature allows users to execute a short list of predefined commands by sending SMS
messages to the router. GWR-HS router series implement following predefined commands:
1. In order to establish PPP connection, user should send SMS containing following string:
:PPP–CONNECT
After the command is executed, router sends a confirmation SMS with “OK” if the command is executed
without errors or “ERROR” if something went wrong during the execution of the command.
2. In order to disconnect the router from PPP, user should send SMS containing following string:
:PPP–DISCONNECT
After the command is executed, router sends a confirmation SMS with “OK” if the command is executed
without errors or “ERROR” if something went wrong during the execution of the command.
3. In order to reestablish (reconnect the router) the PPP connection, user should send SMS containing
following string:
:PPP–RECONNECT
After the command is executed, router sends a confirmation SMS with “OK” if the command is executed
without errors or “ERROR” if something went wrong during the execution of the command.
4. In order to obtain the current router status, user should send SMS containing following string:
:PPP–STATUS
After the command is executed, router sends one of the following status reports to the user:
–
CONNECTING
– CONNECTED, WAN_IP: { WAN IP address or the router }
– DISCONNECTING
– DISCONNECTED
5. In order to establish PPP connection over the other SIM card, user should send SMS containing following
string:
:SWITCH-SIM
After the command is executed, router sends a confirmation SMS with “OK” if the command is executed
without errors or “ERROR” if something went wrong during the execution of the command.
6. In order to restart whole router user should send SMS containing following string:
:REBOOT
After the command is executed, router sends a confirmation SMS with “OK” if the command is executed
without errors or “ERROR” if something went wrong during the execution of the command.
Remote control configuration page is presented on the following figure. In order to use this feature, user
must enable the SMS remote control and specify the list of SIM card numbers that will be used for SMS remote
control. The SIM card number should be entered in the following format: {Country Code}{Mobile Operator
Prefix}{Phone Number} (for example
+38164111222 ). SMS service centre number can be obtained automatically
(option “Use default SMSC is enabled”) or manually by entering number under field “Custom SMSC”.
As presented in the figure configuration should be performed separately for both SIM cards. After the
configuration is entered, user must click on
Save
button in order to save the configuration.