Geneko GWR High Speed Router Series, Руководство пользователя

Страница: 15 / 133

User Manual
Geneko GWR High Speed Router Series
15
Figure 5 – GWR-HS Router top panel side Figure 6 – GWR-HSW Router top panel side
LED Indicator Description:
1. Cell. Link (green LED) will blink when connection is active
2. WiFi (green LED) will blink when WiFi interface is enabled
3. Power status (green LED) on – Power supply. Power status LED will blink when the GWR-HS Router is in
initializing state.
4. Signal strength LED indicator:
•
–107 or less dBm = Unacceptable (1 LED),
•
–107 to –98 dBm = Weak (2 LED),
•
–98 to –87 dBm = Moderate (3 LED),
•
–87 to –76 dBm = Good (4 LED),
•
–76 or better dBm = Excellent (5 LED).
•
0 is not known or not detectable (running LED).
Signal strength LED will blink when GPRS/EDGE/HSPA/HSPA+/LTE connection is not active. When
connection is active Signal strength LED is on. Reset condition will be indicated by blinks of the first and
last Signal strength LED. When signal quality is not known or not detectable there will be running LED
indication.