Geneko GWR High Speed Router Series, Руководство пользователя

Страница: 48 / 133

User Manual
Geneko GWR High Speed Router Series
48
order to maintain the connection active.
Ping Timeout
This field specifies ping interval for keepalive option.
Pre–shared Secret
Generate or Paste the Pre–shared Secret. You have an additional option to Export the
PSK.
Max Fragment Size
If you select UDP protocol whether in connect or wait mode you must specify Max
Fragment Size (default is 1300 bytes). If you prefer to keep fragmentation disabled
enter 0
Renegotiate interval
Specify renegotiate interval if username/password is selected as authentication
method.
CA Certificate Specify the CA Certificate.
Username Specify the username.
Password Specify the password.
Local Certificate
Specify the local certificate.
Local Private Key
Specify the local private key.
DH Group
Choose the DH Group from the following: 786 bits, 1024 bits, 1536 bits, 2048 bits.
Remote Host or IP
Address
Specify server IP address or hostname.
Redirect Gateway This option allows usage of OpenVPN tunnel as a default route.
Tunnel Interface
Configuration
Pull tunnel interface configuration from server side.
Manual configuration
Local Interface IP
Address
Specify the IP address of the local VPN tunnel endpoint.
Remote Interface IP
Address
Specify the IP address of the remote VPN tunnel endpoint.
Pull from server
Network Topology Specify topology of OpenVPN interfaces – NET30, P2P or SUBNET
Back Click Back to return on IPSec Summary screen.
Reload Click Reload to discard any changes and reload previous settings.
Save
Click Save to save your changes back to the GWR-HS Router. After that router
automatically goes back and begin negotiations of the tunnels by clicking on the
Start button.
Table 14 – OpenVPN parameters