BCT_T Rev.00 05-2015
pag. 94
4.
Press and release the
key (4) and then repeatedly press and release the
key (5) or the
key (6) to select
the input or the output.
Operate as follows to exit the procedure:
5.
Press and release the ESCAPE key or do not operate for 60 s.
7.4.6
– DEFROSTING ACTIVATION IN MANUAL MODE
Defrosting activation in manual mode
Operate as follows:
1.
Make sure the device is in the "on" status, that pre-cooling or storage cycle is in progress.
2.
Make sure that the keyboard is not locked and that no procedure is in progress.
3.
Press and release the
key (1), press and release the
key (2) and then press and release the START /
STOP(3)key.
If the evaporator probe is enabled, i.e. the parameter P4 is set at 1 and on activation of defrosting the evaporator
temperature is above that established with parameter d2, defrosting will not be activated.
Содержание New Runner Series
