BCT_T Rev.00 05-2015
pag. 119
7.7.11
– UPLOAD AND DOWNLOAD OF THE CONFIGURATION PARAMETERS
Upload and download of the configuration parameters
To make the download of the configuration parameters operate as follows:
1.
Make sure the device is in the “stand-by” status.
2.
Insert an USB peripheral in the USB serial port.
3.
Press and release the
key (1) to select “
DOWNLOAD PARAMETERS
”, then press and release the
key (2):
it will automatically be started the writing (into the peripheral) of a text document by name “param.txt” (containing
information about the configuration parameters); the writing procedure can take some minutes.
4.
To the end of the download remove the USB peripheral from the USB port.
To make the upload of the configuration parameters operate as follows:
5.
Make sure the device is in the “stand-by” status.
6.
Insert an USB peripheral in the USB serial port; make sure the peripheral contains the text document by name
“param.txt” (see point 3).
7.
Press and release the
key (1) to select “
UPLOAD PARAMETERS
”, then press and release the
key (2): it
will automatically be started the reading (from the peripheral) of the text document by
name “param.txt”
(containing information about the configuration parameters); the reading procedure can take some minutes.
Содержание New Runner Series
