Gemm New Runner Series, Инструкция по эксплуатации

Страница: 129 / 138

BCT_T Rev.00 05-2015 pag. 129
8.3
– EXTRAORDINARY MAINTENANCE
If the appliance needs extraordinary maintenance, or if operating anomalies occur that are not described in this manual,
contact the manufacturer.
8.4
– SIGNALS AND INDICATIONS
The following table illustrates the meaning of the signalling LEDS.
LED Meaning
Blast chilling LED.
If it is on:
-
blast chilling will be in progress (or has been performed).
If flashing:
-
a blast chilling and storage cycle will have been selected.
Deep freezing LED.
If it is on:
-
a soft deep freezing cycle will be in progress (or has been performed).
If flashing:
-
a soft deep freezing and storage cycle will have been selected.
HARD
hard blast chilling/deep freezing LED
If it is on:
-
hard blast chilling or deep freezing will be in progress (or has been performed).
If flashing:
-
a hard blast chilling and storage cycle or a deep freezing and storage cycle will have been
selected.
temperature-controlled blast chilling/temperature-controlled deep freezing LED.
If it is on:
-
a temperature-controlled blast chilling and storage cycle or a temperature-controlled deep
freezing and storage cycle will have been performed.
- temperature-controlled blast chilling or deep freezing will be in progress.
If flashing:
-
a temperature-controlled blast chilling and storage cycle or a temperature-controlled deep
freezing and storage cycle will have been selected.
- the verification test for the correct insertion of the needle probe will not have been completed
successfully
- needle probe heating will be in progress.
time-controlled blast chilling/time-controlled deep freezing LED.
If it is on:
-
a time-controlled blast chilling and storage cycle or a time-controlled deep freezing and storage
cycle will have been performed.
- time-controlled blast chilling or deep freezing will be in progress.
If flashing:
-
a time-controlled blast chilling and storage cycle or a time-controlled deep freezing and storage
cycle will have been selected.
- setting the real date and time will be in progress.