9
keypad will beep 6 times, indicating the panel has
been disarmed. The red Armed LED will go out.
If an incorrect Arm/Disarm Code is entered, the
keypad will sound a 1-second tone, indicating
incorrect entry. Press the
C
key and re-enter
the code.
Disarming after an Alarm
(Alarm Memory)
The armed LED and the zone(s) that caused the
alarm will be be flashing. Disarm the panel. The
system is currently not detecting zone faults or
displaying system trouble. The zone(s) that
caused the alarm will continue to flash. The
STATUS and
H
SYSTEM TRBL LEDs are out
indicating:
The system is displaying
Alarm Memory
.
Press the
C
key to clear Alarm Memory.
Bypassing
Automatic Bypassing
Note: Automatic Bypassing has not been
evaluated by UL
Home/Away with Delay Zones
This zone type has the following operation
depending on whether an
Exit/Entry Zone
has
been violated during the
Exit Delay
time.
Home
Exit/Entry Zone
is not
violated
Zones selected as Home/Away with Delay
Zones
will be bypassed automatically.
Away with Delay
E
xit/Entry Zone is violated
Zones selected as Home/Away with Delay
Zones
will have a fixed 20-second entry
delay when violated before an
Exit/Entry
Zone
.
Full Setting the System with Automatic
Bypassing - Home/Away with Delay
Zones
From the Keypad
Press
BC
to return protection to
Home/Away with Delay Zones
that have
been automatically bypassed. Three
minutes are allowed to walk through
Exit/
Entry
and
Exit/Entry Follower Zones
.
Using A Keyfob (GEM-KF)
All zones in the system can be armed
regardless of the state of the
Exit/Entry
Zone
when arming with a Keyfob and using
an AUX key programmed as
Full Set
.
Press [ON] and press and hold the [A1] or
[A2] keys for 1.5s when leaving the
premises. All zones, including
Home/Away
Zones
are armed.
Bypassing a zone
Press the
B
key, then the zone number to
be bypassed. While the panel is DISARMED,
the bypassed zone LED will flash slowly;
indicating the zone has been bypassed. While
the panel is ARMED, the bypassed zones will
only be displayed if the
Display Bypassed
[21-3]
option has been selected.
Unbypassing a zone (Disarmed only)
Press the
B
key then the number of the
zone to be unbypassed.
Group Bypass
Press the
E
key to Bypass all
Exit/Entry
Follower Zones
[02] or
Home/Away Zones
[01] (only if the system is programmed
exclusively for
Home/Away with Delay
zones
).
Using A Keyfob (GEM-KF)
Hold the [A1] or [A2] key on the Keyfob to
Bypass all
Exit/Entry Follower Zones
[02] or
Home/Away Zones
[01] (only if the system is
programmed exclusively for
Home/Away with
Delay zones
).
User Program Mode
To prevent the loss of the User 1 Code, the panel
default program includes
User 1 Code Lockout
[96-2].
To change the User 1 Code from its default value
of
1234
, program the 4-digit User 1 Code through
Dealer Programming [95]. User 1 Arm/Disarm
code is also used to program User Codes 2 - 8.
By default, the User 1 code cannot be re-
programmed by the user.
If it is necessary to change the User 1 code, it
can be changed through downloading or Dealer
keypad programming. From Dealer Program
Mode, change the U
ser 1 Code Lockout
([96-2]
LED=OFF) to disabled.
Entering User Program Mode
