Gemini 810, Руководство пользователя

Страница: 13 / 56

QUICK START
Plug In Power Supply
Insert AA Batteries into Activation Pedal
Turn Laser Unit ON
Enter Electronic Key Passcode
Select Your Desired Wavelength
Select Your Desired Power Setting
During initial setup use the AC/DC power supply for at least one hour
to fully charge the battery. Plug the power supply into an AC outlet and
connect to the corresponding connector on the rear of the system.
Install the (2) provided AA batteries into the wireless activation pedal.
When replacing the AA betteries, we recomend an ALKALINE type
battery.
The universal ON/OFF button is a membrane switch that requires
pressure in order to be activated.
Enter the electronic key passcode on the keypad using the UP and DOWN
arrow keys. The security code is
UP, DOWN
,
UP, DOWN.
A checkmark
icon will appear when the correct key is input.
Select the desired laser wavelength on the keypad:
810 nm, 980 nm, or Dual Wavelength.
Select your desired power setting, then activate the laser. (Pages 17-21)
1.
2.
3.
4.
5.
6.
“Please select wavelength”
13