Gemini 810, Руководство пользователя

Страница: 47 / 56

ELECTROMAGNETIC ENVIRONMENT GUIDANCE
IMMUNITY TEST
IEC 60601
TEST LEVEL
COMPLIANCE
LEVEL
ELECTROMAGNETIC
ENVIRONMENT GUIDANCE
Portable and mobile radio equip-
ment must not be used within the
recommended working clearance
from the Gemini laser unit and its
cables, which is calculated based on
the equation suitable for the rele-
vant transmission frequency.
Recommended separation distance
d= [1.2] √P
d= [1.2] √P at 80 MHz to 800 MHz
d= [2.3] √P at 800 MHz to 2.5 GHz
where P is the nominal transmitter
output in watts (W) specified by the
transmitter manufacturer and d is
the recommended working clearance
in meters (m).
Field strengths from fixed RF trans-
mitters, as determined by an electro-
magnetic site survey
2
should be less
than the compliance level
3
in each
frequency range.
Interference is possible in the vicin-
ity of equipment bearing the follow-
ing graphic symbol.
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
3 Vrms
150 kHz to 80 MHz
3 V/m
80 MHz to 2.5 GHz
3 Vrms
3 V/m
NOTES
1
The higher frequency range applies at 80 MHz and 800 MHz.
2
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast,
cannot be predicted theoretically with accuracy. An investigation of the location is recommended
to determine the electromagnetic environment resulting from stationary HF transmitters. If the
measured field strength in the location in which the Gemini 810 + 980 diode laser is used exceeds
the applicable RF compliance level above, the Gemini laser unit should be observed to verify
normal operation. If unusual performance characteristics are observed, it may be necessary to take
additional measures such as reorientation or repositioning of the Gemini 810 + 980 diode laser.
3
Over the frequency range 150kHz to 80MHz, field strengths should be less than 3V/m.
47