Gema OptiFlex Pro B Spray, Инструкция по эксплуатации и список запасных частей

Страница: 20 / 58

Rev. 00 03/19
20  Product description OptiFlex Pro B Spray
Dimensions
OptiFlex Pro B Spray
Width 481 mm
Depth 822 mm
Height 1109 mm
Weight ca. 46 kg
Processible powders
OptiFlex Pro B Spray
Plastic powder yes
Metallic powder yes
Enamel powder no
Powder output (reference values)
OptiFlex Pro B Spray
Conveying hose till 20 m – internal Ø 7 mm
Suction hose max. 1.5 m – internal Ø 4.5 mm
50-300 g/min
Air flow rates
The total air consists of transport air and supplementary air, in relation to
the selected powder quantity (in %). As a result the total air volume is
maintained constant.
OptiFlex Pro B Spray Range
Factory
setting
Flow rate – fluidizing air:
– Device type B 0-1.0 Nm³/h 0.1 Nm³/h
– Device type F (without AirMover
air requirements)
0-5.0 Nm³/h 1.0 Nm³/h
Electrode rinsing air flow rate
0-5.0 Nm³/h 0.1 Nm³/h
Flow rate total air (at 5.5 bar)
5 Nm³/h
– Transport air flow rate 0-5.5 Nm³/h
– Spraying air flow rate 0-5.5 Nm³/h
The max. total air consumption during the coating operation is
< 5,5 Nm³/h:
– Total air = 5 Nm³/h (Transport air + Spraying air)
– Electrode rinsing air = 0,1 Nm³/h (flat jet nozzle)
The total air consumption for the device is determined based on
the 3 configured air values (without AirMover air value for device
type F).
– These values apply for an internal control pressure of 5.5 bar!