Gema OptiFlex Pro B Spray, Инструкция по эксплуатации и список запасных частей

Страница: 32 / 58

Rev. 00 03/19
32  Operation OptiFlex Pro B Spray
much powder little powder
Adjust the powder output volume (e.g. according to the desired
coating thickness)
– Factory default setting of 50% is recommended for initial
operation. The total air volume is thereby kept constant
automatically by the control unit.
To achieve maximum efficiency, we recommend avoided an
overly high powder volume where possible!
2. Check fluidization of the powder in the powder container
3. Point the gun into the booth, switch the gun on and visually check
the powder output
Setting the spraying air
The spraying air ( ZL ) will be set in accordance to the calculated transport
air (
TL
) and the adjusted total air volume (
GL
).
Formula:
GL = ZL + TL
fig. 8: Air streams in the diffuser adapter
GL
Total air
TL
Transport air
ZL
Spraying air
P
Gun
Setting the electrode rinsing air
1. Press the key.
The second display level will be shown.
2.