Gema CM40 Скачать руководство пользователя страница 30

Страница: 30 / 120

Rev. 01 12/21

•

Assembly / Connection

MagicControl 4.0 (CM40)

Inserting the SD card

The SD card contains the actual operating system and all important
application information. In order for the operating panel to function
properly, the SD card must be inserted before the plant is started.

The slot for inserting the SD card is located on the side of the operating
panel.

ATTENTION

Data loss

A voltage drop or removal of the SD card while it is being written to
can lead to data loss or destruction of the SD card.

► Only insert the SD card into the operating panel with the power

switched off.

► Avoid writing data on to the SD card when there is also a drop in

voltage.

► Only remove the SD card from the operating panel with the power

switched off.

► Before switching off, make sure that no software is writing data on

to the SD card.

Inserting SD card

SD cards are protected against incorrect insertion.

Do not use force when inserting.

Push the SD card into the slot until it clicks into place.

Removing SD card

Push the SD card all the way into the SD card slot.

Pull the SD card out of the SD card slot.

Store the SD card in its packaging for protection.

Содержание CM40

























































































































Результаты поиска

Содержание CM40

Отзывы:

Бренды по названию

Популярные бренды

Gema CM40, Инструкция по эксплуатации и список запасных частей

Результаты поиска

Содержание CM40

Отзывы:

Бренды по названию

Популярные бренды