8
Gerhard Geiger GmbH & Co. KG | 100W1552
1118
V000
en
EN
EN
Programming the end positions
Variant A: lower and upper end positions with stop
To open the learning mode for end positions, press the PROG key or the UP and DOWN keys
simultaneously until the motor confirms (1 x clac-clac). The motor jerks (start, stop, start) at
each run command to confirm the learning mode activation.
Lower end position:
Press the UP or DOWN key until the sun protection
system has reached the lower stop and the motor swit-
ches off automatically.
The lower end position is now stored.
Upper end position:
Press the UP or DOWN key until the sun protection
system has reached the upper stop and the motor
switches off automatically.
The upper end position is now stored.
The programming is completed and the motor returns to
normal mode.
Variant B: lower end position with stop/upper end position freely adjustable
To open the learning mode for end positions, press the PROG key or the UP and DOWN keys
simultaneously until the motor confirms (1 x clac-clac). The motor jerks (start, stop, start) at
each run command to confirm the learning mode activation.
Lower end position:
Press the UP or DOWN key until the sun protection
system has reached the lower stop and the motor swit-
ches off automatically.
The lower end position is now stored.
Upper end position:
Press the UP or DOWN key until the sun protection system
has reached the selected upper end position. Corrections
with the UP and DOWN keys are possible.
Press the programming key or the UP and DOWN keys at
the same time until the motor confirms (3 x click-click).
The upper end position is now stored.
The programming is completed and the motor returns to
normal mode.
3 x
click-
click
