GEIGER GEIGER-Easy-ZIP 1.x Скачать руководство пользователя страница 2

Страница: 2 / 16

Gerhard Geiger GmbH & Co. KG | 100W1552

1118

V000

1. General information

Dear customer,
By purchasing a Geiger motor you have decided on a quality product from Geiger.

Thank you very much for your decision and the confidence placed in us.

Before you put this drive into operation please observe the following safety instructions. It

serves for the prevention of danger and for the avoidance of personal injury and damage to

property.
The installation and operating instructions contain important information for the installer, the

specialist electrician and the user. Please pass on these instructions if you transfer the product.

These instructions should be kept by the user.

2. Guarantee

In the case of incorrect installation contrary to the installation and operating instructions and/

or constructional modification, the legal and contractual guarantee for property damage and

product liability lapses.

Index

1. General information ..................................................................2

2. Guarantee ..................................................................................2

3. Intended use ..............................................................................3

4. Safety instructions ....................................................................3

5. Safety instructions for assembly ............................................4

6. Installation instructions ...........................................................5

7. Information for the specialist electrician ................................6

8. Connection of the setting switch ............................................6

9. Control options .........................................................................7

10. Setting of the end positions with Easy-ZIP 1.x ......................7

11. Setting of the end positions with Easy-ZIP 2.x

(Qi mode) .................................................................................11

12. Setting of the end positions with Easy-ZIP 3.x

(automatic mode) ....................................................................11

13. Obstacle detection ..................................................................12

14. Deactivating the obstacle detection in DOWN direction .....13

15. Reactivating the obstacle detection ......................................13

16. End position correction ..........................................................13

17. What to do if… .........................................................................13

18. Maintenance ............................................................................13

19. Declaration of conformity ......................................................14

20. Technical data for SOLIDline motors

with 16 revolutions per minute ..............................................15

21. Technical data for SOLIDline motors

with 55 revolutions per minute ..............................................15

22. Notes on waste disposal ........................................................16

Содержание GEIGER-Easy-ZIP 1.x

















Результаты поиска

Содержание GEIGER-Easy-ZIP 1.x

Отзывы:

Похожие инструкции для GEIGER-Easy-ZIP 1.x

Бренды по названию

Популярные бренды

GEIGER GEIGER-Easy-ZIP 1.x, Оригинальная инструкция по сборке и эксплуатации

Результаты поиска

Содержание GEIGER-Easy-ZIP 1.x

Отзывы:

Похожие инструкции для GEIGER-Easy-ZIP 1.x

Бренды по названию

Популярные бренды