GEHEIT PN 1, Руководство по эксплуатации

Страница: 8 / 24

6
4.2 Safe Operation
●
Comply with the requirements of accident prevention regulation “Processing of Coating
Materials” (e.g. in Germany VBG 23).
●
All persons using the ABAC Spray Gun PN 1 / PN 1A must have read and understood this
Operating Manual, particularly the section entitled “Safety Notes”.
●
Use only paints and solvents with a flash point of 21
°
C / 70
°
F or higher without additional
heating (see details on paint container).
●
When working in confined spaces, these must be properly ventilated using effective
technical ventilation systems.
●
The ABAC Spray Gun PN 1 / PN 1A is not splash-proof. It must not be used out of doors,
when it is raining or splashed or washed with water or immersed in liquid.
●
The ABAC Spray Gun PN 1 / PN 1A must not be used in works locations subject to the
provisions of explosion prevention regulations, or on premises and in areas where there is a
risk of fire.
●
Take care to ensure that there are no ignition sources in the vicinity, such as naked flames,
sparks, glowing wires, hot surfaces, lighted cigarettes etc. The distance between spray jet
exit and a possible source of ignition (even the device itself) must be at least 5 m (fire and
explosion hazard from ignitable spray mist).
●
The sprayed paint emerges from the nozzle at high pressure. Never direct the spray jet at
people or animals. If the skin is injured by paint, lacquer or solvent there is a risk of infection.
Seek medical treatment immediately and inform the doctor which paint, lacquer or solvent
was used.
●
Poisonous fumes may be given off during spraying (see details on the paint container). Use
a breathing mask as directed by paint manufacturer’s instructions. Keep children and other
people away from the working area.
●
Keep the ABAC Spray Gun PN 1 / PN 1A in a safe place that is inaccessible to children and
unauthorized personnel. Make sure that no unauthorized personnel (particularly children)
can put the ABAC Spray Gun PN 1 / PN 1A into operation.
●
Store your ABAC Spray Gun PN 1 / PN 1A in a dry ventilated room.
●
For Safety reasons you should only use ABAC original accessories and ABAC original
spare parts.