GEHEIT PN 1, Руководство по эксплуатации

Страница: 24 / 24

22
13 Annex
Notes on processing and settings data for spraying tasks using ABAC Spray Gun PN 1 / PN 1A,
measured with 4 mm dipper cup for viscosity checks at a spray material temperature of
20
°
C/70
°
F.
Spray Material Nozzle
Diameter (mm)
Jet / Pattern
Type
flat circular
Viscisity
DIN-Sec.
Thinning
Vol.-%
approx .
Zapon lacquer 0,8-1,0-1,5 x x 16 – 20 10
Fast polished surface primer
matting, polishing paint etc.
1,5 – 2,0 x x 16 – 20 10
Patinates 0,5 – 0,8 – 1,0 x x original undiluted
Filler primers 1,5 – 2,0 – 2,5 x x 20 – 30 10
Two component paint DD,
colourless paints
1,0 - 1,5 – 2,0 x x 16 – 25 5
Pigmented paints 1,0 – 1,5 – 2,0 x x 16 – 30 5
Synthetic alkyd paints, acrylic
paints
1,0 – 1,5 – 2,0 x x 16 – 25 10
Silk gloss paints 1,5 – 2,0 x x 16 – 25 10
Radiator paints 1,5 – 2,0 x x 17 – 21 10
Acrylic and dispersion paints 2,0 – 2,5 – 3,0 x x 20 – 30 10
Primer oil paints 1,5 – 2,0 x x 16 – 25 10
Synthetic paints, PVC etc. 1,5 – 2,0 x x 20 – 30 10
Coating filler, polyester DD
synthetic resin etc.
1,5 – 2,0 – 2,5 x x 18 – 30 10
Effect paints, touch up 1,5 – 2,0 – 2,5 x x 30 – 40 10
Hammer effect paints 1,5 – 2,0 – 2,5 x x 20 – 25 10
Sigmulto, Diwatone /
Alphatone, Jäger mosaic paint,
Aquaria, colour effect paint 2,5 – 3,0 x original undiluted
Insulation / Ignition / Protection
impregnations oils 1,5 – 2,0 – 2,5 x x original undiluted
Anticorrosive primers, paints
reaction primer
1,5 – 2,0 x x 16 – 25 5
Aluminum bronze 1,0 – 1,5 – 2,0 x x original undiluted
Finish – sprayable waxes 1,0 – 1,5 – 2,0 x x original undiluted
Note:
This spray material can also be applied in speckled fashion, if you unscrew the entire air-head
from your spray gun.