GEHEIT PN 1, Руководство по эксплуатации

Страница: 16 / 24

14
Störung Mögliche Ursache Abhilfe
Spray gun delivers no
paint or works unevenly
·
Lid is not properly closed
·
Carefully clean the lid, lid
seal and rim of cup and, if
necessary, replace lid seal.
·
Angle-piece and/or pressure hose
are/is blocked
·
Clean angle-piece and
pressure hose
·
Nozzle is blocked
·
Clean/change nozzle
Wide jet uneven
·
Side holes in air-head are clogged
·
Clean air-head
Paint jet sprays to one
side
·
Paint has accumulated on the
outside of the nozzle
·
Clean the nozzle
·
Nozzle is not tightly seated
·
Tighten the nozzle
·
Holes in the air-head are clogged
·
Clean the air-head
10 Operating Instructions
Depending on actual use and location of the equipment, users must issue an operating
instruction, based on this manual and in the language of their employees, to define further
details for the safe operation of the ABAC Spray Gun PN 1 / PN 1A. This operating instruction
is to be displayed in a suitable public place at the workplace and to be read and observed by all
employees.