gefran AFE200 4 Series, Инструкция по эксплуатации, Страница: 131 / 214

AFE200 • Instruction Manual
131
14.4.37 4270 Fieldbus S->M10 ipa FBM2SIPA 0 0 20000 RW
14.4.41 4280 Fieldbus S->M11 ipa FBM2SIPA 0 0 20000 RW
14.4.45 4290 Fieldbus S->M12 ipa FBM2SIPA 0 0 20000 RW
14.4.49 4300 Fieldbus S->M13 ipa FBM2SIPA 0 0 20000 RW
14.4.53 4310 Fieldbus S->M14 ipa FBM2SIPA 0 0 20000 RW
14.4.57 4320 Fieldbus S->M15 ipa FBM2SIPA 0 0 20000 RW
14.4.61 4330 Fieldbus S->M16 ipa FBM2SIPA 0 0 20000 RW
Setting of the parameter to associate with the bus channel. The default setting is
0
,
which means channel not active.
When setting a parameter, the format is also automatically set in the sys parameter
Menu PAR Description UM Type FB BIT Def Min Max Acc
14.4.2 4182 Fieldbus S->M1 sys ENUM Not assigned 0 10 RW
14.4.6 4192 Fieldbus S->M2 sys ENUM Not assigned 0 10 RW
14.4.10 4202 Fieldbus S->M3 sys ENUM Not assigned 0 10 RW
14.4.14 4212 Fieldbus S->M4 sys ENUM Not assigned 0 10 RW
14.4.18 4222 Fieldbus S->M5 sys ENUM Not assigned 0 10 RW
14.4.22 4232 Fieldbus S->M6 sys ENUM Not assigned 0 10 RW
14.4.26 4242 Fieldbus S->M7 sys ENUM Not assigned 0 10 RW
14.4.30 4252 Fieldbus S->M8 sys ENUM Not assigned 0 10 RW
14.4.34 4262 Fieldbus S->M9 sys ENUM Not assigned 0 10 RW
14.4.38 4272 Fieldbus S->M10 sys ENUM Not assigned 0 10 RW
14.4.42 4282 Fieldbus S->M11 sys ENUM Not assigned 0 10 RW
14.4.46 4292 Fieldbus S->M12 sys ENUM Not assigned 0 10 RW
14.4.50 4302 Fieldbus S->M13 sys ENUM Not assigned 0 10 RW
14.4.54 4312 Fieldbus S->M14 sys ENUM Not assigned 0 10 RW
14.4.58 4322 Fieldbus S->M15 sys ENUM Not assigned 0 10 RW
14.4.62 4332 Fieldbus S->M16 sys ENUM Not assigned 0 10 RW
When setting the sorg parameter the format is automatically set on the relative sys .
If sorg is set to null , the data format does not change. The value of the format can be
selected from the following list, according to the parameter selected as the source:
0 Not assigned
1 Count 16
2
Count 32
3 Fill 16
4 Fill 32
5 Mdplc 16
6 Mdplc 32
7
EU
8 Eu float
9 Par 16
10 Par 32
If set to 0 the channel is not assigned.
If set to 1 the datum is assigned a 16-bit count.
If set to
2
the datum is assigned a 32-bit count.
If set to 3 16 bits on the channel are reserved for the datum, not used.
If set to 4 32 bits on the channel are reserved for the datum, not used.
If set to 5 the datum is assigned a 16-bit count used by MDPLC.
If set to 6 the datum is assigned a 32-bit count used by MDPLC.
If set to
7
the datum is assigned engineering units on a 16-bit integer.
If set to 8 the datum is assigned engineering units on a 32-bit integer.
If set to 9 , the datum is assigned a 16-bit integer engineering unit format not in real
time (5-10ms)