gefran AFE200 4 Series, Инструкция по эксплуатации

Страница: 128 / 214

128
AFE200 • Instruction Manual
Menu PAR Description UM Type FB BIT Def Min Max Acc
14.2.8 5608 IP address UINT32 0 0
4294967295
ER
Display of DCP address set via configuration of Profinet node.
14.3 - COMMUNICATION/FIELDBUS M2S
Menu PAR Description UM Type FB BIT Def Min Max Acc
14.3.1 4020 Fieldbus M->S1 ipa FBM2SIPA 0 0 0 R
14.3.5 4030 Fieldbus M->S2 ipa FBM2SIPA 0 0 0 R
14.3.9 4040 Fieldbus M->S3 ipa FBM2SIPA 0 0 0 R
14.3.13 4050 Fieldbus M->S4 ipa FBM2SIPA 0 0 0 R
14.3.17 4060 Fieldbus M->S5 ipa FBM2SIPA 0 0 0 R
14.3.21 4070 Fieldbus M->S6 ipa FBM2SIPA 0 0 0 R
14.3.25 4080 Fieldbus M->S7 ipa FBM2SIPA 0 0 0 R
14.3.29 4090 Fieldbus M->S8 ipa FBM2SIPA 0 0 0 R
14.3.33 4100 Fieldbus M->S9 ipa FBM2SIPA 0 0 0 R
14.3.37 4110 Fieldbus M->S10 ipa FBM2SIPA 0 0 0 R
14.3.41 4120 Fieldbus M->S11 ipa FBM2SIPA 0 0 0 R
14.3.45 4130 Fieldbus M->S12 ipa FBM2SIPA 0 0 0 R
14.3.49 4140 Fieldbus M->S13 ipa FBM2SIPA 0 0 0 R
14.3.53 4150 Fieldbus M->S14 ipa FBM2SIPA 0 0 0 R
14.3.57 4160 Fieldbus M->S15 ipa FBM2SIPA 0 0 0 R
14.3.61 4170 Fieldbus M->S16 ipa FBM2SIPA 0 0 0 R
Setting of the parameter to associate with the bus channel. The default setting is 0 ,
which means channel not active.
If the parameter to be connected is a sorg (source), the channel and parameter can
also be associated by modifying the sorg parameter in its menu.
When setting a parameter, the format is also automatically set in the sys parameter.
Menu PAR Description UM Type FB BIT Def Min Max Acc
14.3.2 4022 Fieldbus M->S1 sys ENUM Not assigned 0 10 RW
14.3.6 4032 Fieldbus M->S2 sys ENUM Not assigned 0 10 RW
14.3.10 4042 Fieldbus M->S3 sys ENUM Not assigned 0 10 RW
14.3.14 4052 Fieldbus M->S4 sys ENUM Not assigned 0 10 RW
14.3.18 4062 Fieldbus M->S5 sys ENUM Not assigned 0 10 RW
14.3.22 4072 Fieldbus M->S6 sys ENUM Not assigned 0 10 RW
14.3.26 4082 Fieldbus M->S7 sys ENUM Not assigned 0 10 RW
14.3.30 4092 Fieldbus M->S8 sys ENUM Not assigned 0 10 RW
14.3.34 4102 Fieldbus M->S9 sys ENUM Not assigned 0 10 RW
14.3.38 4112 Fieldbus M->S10 sys ENUM Not assigned 0 10 RW
14.3.42 4122 Fieldbus M->S11 sys ENUM Not assigned 0 10 RW
14.3.46 4132 Fieldbus M->S12 sys ENUM Not assigned 0 10 RW
14.3.50 4142 Fieldbus M->S13 sys ENUM Not assigned 0 10 RW
14.3.54 4152 Fieldbus M->S14 sys ENUM Not assigned 0 10 RW
14.3.58 4162 Fieldbus M->S15 sys ENUM Not assigned 0 10 RW
14.3.62 4172 Fieldbus M->S16 sys ENUM Not assigned 0 10 RW
Setting of the format of the datum received on the channel. When the
src
parameter
is programmed, the format is automatically programmed on the relative sys . If the src
parameter is reset to null , the format does not change. The value of the format can be
selected from the following list, according to the parameter selected as the source: