ADV200 • Quick start up guide - Specification and installation
61
7.1 Startup Wizard
Introduction
The ADV200 can operate with regulation modes : Voltage/Frequency (V/f) , Sen-
sorless (open loop) and
fi
eld-oriented control (closed loop).
Menu 04 DRIVE CONFIG, parameter 04.2
Regulation mode
, PAR: 552,
default=V/f.
Start-up in one mode is valid also for the other regulation modes.
The startup wizard is a guided procedure used for quick start-up of the drive that
helps to set the main parameters.
It consists of a series of questions relating to the various sequences for entering
and calculating the parameters necessary for correct drive operation.
The order of these sequences is as follows:
●
Basic connections
See step 1
●
Setting motor parameters
See step 2
●
Self-tuning with rotating motor
See step 3A
●
Self-tuning with motor at stand-still or coupled to the load
See step 3B
●
Setting the maximum speed reference value
See step 4
●
Setting ramp parameters
See step 5
●
Saving parameters
See step 6
●
Speed test
See step 7
The format of the function selection page is as follows:
T+
T-
E
N
L
OC
ILim
n:
0
AL
01
M
ON
IT
O
R
02 D
RIVE I
N
F
O
03 S
TARTUP WIZAR
D
0
4
D
RIVE
CON
FIG
T+
T-
EN
L
OC
ILi
m
n:
0
AL
S
TARTUP WIZAR
D
S
et motor data ?
E=Yes
D
own=
N
ext
Pressing the E key, the function to be programmed is accessed.
Press the
▼
(Down) key to move to the next function skipping the current function.
Press the
▲
key to return to the previous function.
To terminate the sequence of functions and return to the menu, press the
ESC
key.
The end of the start-up sequence is indicated with the page:
T+
T-
EN
L
OC
ILi
m
n:
0
AL
S
TARTUP WIZAR
D
End of sequence !
Up=Back
D
own=
N
ext
Press the
▼
(Down) key to exit the sequence and return to the menu.
Note !
In the procedures described below, the settings have been made using the ADV2075 drive and a 10 Hp
(7.36 kW) asynchronous motor.
