gefran 2850T Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 166

gefran 2850T Скачать руководство пользователя страница 7

80703B_MHW_2850T/3850T_02-2019_ENG

5

PREFACE

PREFACE

Device data

Warnings and safety

Write the order code and other plate data found on the label applied to the controller exterior here (see illustration). Should
you need technical assistance, they must be communicated to Gefran Customer Service.

Always make sure you have the latest manual version, that
can be freely downloaded from the Gefran website
(www.gefran.com).

The devices illustrated in the manual must be installed by
qualified technicians, following the laws and regulations in
effect and according to the instructions contained in this
manual.

Installation and/or maintenance technicians must read
this manual and strictly follow the instructions herein and
found in the annexes since Gefran cannot be held liable
for personal, property and/or product damages should the
following conditions not be met.

This manual must be available to people who interact with
the devices described herein.
Before interacting with 2850T and 3850T multi-purpose
controllers, the operator must be adequately instructed on
the device operating, emergency, diagnostics and mainte-
nance procedures.

If 2850T and 3850T multi-purpose controllers are used in
applications with risk of personal, machine or material dam-
ages, they must be combined with auxiliary alarm devices.
We recommend ensuring the ability to check alarm opera-
tions even during normal operations.

Do not touch live device terminals.

Before contacting Gefran Customer Service, in the event of
alleged instrument malfunctions, we recommend consulting
the Troubleshooting Guide in the "Maintenance"

Serial number

SN

Finished product
code

CODE

Order code

TYPE

Power voltage

SUPPLY

Firmware version

VERS.

«
...
5
6
7
8
9
...
»

Содержание 2850T







































































































































































Отзывы:

Нет отзывов