manualshive.com logo in svg

gefran 2850T, Инструкция по использованию и установке, Страница: 51 / 166

Поделиться
Скачать
gefran 2850T Скачать руководство пользователя страница 51

49

4. CONFIGURATION

80703B_MHW_2850T/3850T_02-2019_ENG

4.12.3.  EXPORT sub-menu

The EXPORT sub-menu allows you to maintain an archive 
of the processes completed through the following steps:
• 

Erase all records in internal memory or in the SD card 
by touching the appropriate button.

• 

Copy all record files to a USB key by touching the 

Copy all files

 key.

• 

Move (copy + delete) all record files on a USB key by 
touching the 

Move all files

 key.

A level 1 or 2 user is required to delete or move files. 
When an operation is performed, the state of progress is 
displayed by a progressive horizontal bar. At the end of the 
operation, the 

Operation completed

 message appears.

A USB key must be inserted in the controller before you 
copy or move files. If the key is missing or is not properly 
inserted, 

Wait USB

 appears under the USB bus symbol, to 

the right.

Note

If an SD card is used, it may be used as the sole filing 
medium or as a copy of the internal disk. In the first case, 

moving and deleting will take place only on the SD, while 
in the second case, the data will be deleted from both the 
internal disk and the SD card.

Free memory on the internal disk is shown under the Disk 
or SD box . The percentage of occupied memory compared 
to total memory is displayed graphically by a vertical bar to 
the left of the box.
Free USB key space is indicated under the USB box.

4.12.3.1.  File format and data structure

The export file is a text file in CSV format (list of values   
separated by ";"), which can be imported and read in an 
Excel file.

The picture below shows how a generic file imported into 
an Excel worksheet can appear.
The following are identified in the example worksheet:
• 

The instrument version (

Version 1.0

).

• 

The name of the program (

Name

) and operator ID (Idt).

• 

The segment name (

Step name

), its duration, any repe-

titions, applied program recipe, etc.

• 

The type of parameters tat are recorded in this exam-
ple: sequential sample number (

Sample

), date (

Date

), 

time (

Time

), process value (

AI_01_PT100_1

) and 

setpoint (

PID_01_SP

). Other samples could record a 

higher number of parameters.

• 

The list of individual samplings, each of which is identi-
fied by date and time and shows the process tempera-
ture (

PV

) and that of the setpoint (

SP

).

• 

The list of events (

Program_Run

 etc.) with date and 

time when they occurred.

Files can be displayed in graph format as well as arranged 
and display format adjusted using the DataLog Utility appli-
cation, distributed for free on the Gefran website.

Example of Datalog reports imported into Excel spreadsheet

Содержание 2850T







































































































































































Отзывы:

Нет отзывов