gefran 2850T Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 166

gefran 2850T Скачать руководство пользователя страница 45

43

4. CONFIGURATION

80703B_MHW_2850T/3850T_02-2019_ENG

4.10. MONITOR menu

4.10.1. STATUS sub-menu

The STATUS submenu shows the status of the controller’s
inputs and outputs and has a page for the F-MIX module
and one for the F-EU16 modules (if present).

You can use the keyboard keys

and

to switch

from one page to another or directly touch the page num-
ber displayed on the top right of the screen. The current
page is highlighted by illuminating the page number box.
The type of I/O module is displayed at the top, in the center
of the page.

The page only displays inputs and outputs belonging to the
module.The IO terminals show the name of each card.

The status of the digital inputs and outputs is indicated by
their background color:

STATUS sub-menu

Digital and analog input and output status

ALARM HISTORY sub-menu

Alarm history stored by the controller.

MONITOR PROG sub-menu

Opening the monitoring page and managing saved
programs.

GETview sub-menu

Creating and managing custom pages.

INFO sub-menu

Controller configuration management.

ENERGY sub-menu

Management of information on the energy consumed
by outputs.

•

white = OFF

•

red

= ON

The status of analog inputs and outputs is shown with their
value at the current time, both the converter points and the
engineering unit.

All values and status are displayed in the STATUS sub-
menu are read-only.

4.10.2. ALARM HISTORY sub-menu

The ALARM HISTORY sub-menu displays the last 1000
alarm events recorded by the controller.
Alarms are displayed in reverse chronological order, mean-
ing it starts from the most recent to continue with the older
ones.
The list can be scrolled using the buttons on the left of the
display:

and

move the list by 3 events;

and

move the list by 10 events;

The date and time the alarm triggered and type are dis-
played for each alarm event.
•

ON

= alarm becomes active

•

OFF = the cause of the alarm disappears

•

OFF-ACK

= the alarm is acknowledged

4.10.3. MONITOR PROGR sub-menu

For information on the page opened from MONITOR PRO-
GR, see paragraph “4.3. Monitor Program” on page 36.

«
...
43
44
45
46
47
...
»

Содержание 2850T







































































































































































Отзывы:

Нет отзывов