manualshive.com logo in svg

gefran 2850T, Инструкция по использованию и установке, Страница: 120 / 166

Поделиться
Скачать
gefran 2850T Скачать руководство пользователя страница 120

118

7. EXAMPLES AND APPLICATION NOTES

80703B_MHW_2850T/3850T_02-2019_ENG

15.  Select 

PROGRAMS

 to access GETlogic logic/mathe-

matical configuration.

16.  Select the program name 

ZERO

 (last row) and edit the 

list of instructions.

Select 

New

 and select 

Mathematics

 from the function 

group list.
A new feature will be added in the instruction list.
Select the new function and edit its parameters.

17.  By clicking on the button >> at the top right, select the 

mathematics function "AVG" (value average).

Configure the input A parameter of the function with 
variable AI_01.
Configure the input B parameter of the function with 
the variable AI_02.
Configure the input C parameter of the function with 
the variable AI_03.
Configure the output parameter of the function with the 
variable Average_value.
For diagnostic purposes, at the set input and output 
variables, their real value is displayed.

18.  Press the 

  button to return to the list of 

functions. Touch the 

Save

 button to store the new 

control logic.

Содержание 2850T







































































































































































Отзывы:

Нет отзывов