Gechter 2,5 HKPE, Перевод оригинального руководства по эксплуатации, Страница: 5 / 60

Content
I
2
6. Commissioning / Operation ................................................................... 28
6.1 Commissioning 28
6.1.1 Functional check before operation 28
6.2 Operation 29
6.2.1 Press process work steps 29
7. Decommissioning ................................................................................... 30
7.1 Shutting down the press (longer period of time) 30
7.2 Relocate the press 30
7.3 Storing the system 31
7.4 Disposing of the press 31
8. Setup and accessories ............................................................................ 32
8.1 Setup process 32
8.1.1 Tightening torques for screws 33
8.1.2 Remove the clamped piece (from 5 HKPV) 34
8.1.3 Clamping the tool 35
8.1.4 Setup 36
8.1.5 Adjust the height 38
8.1.6 Adjusting the stroke length and pressing force (only for type 8/12 and
8/16) 39
8.1.7 Changing the hand lever from right to left 40
9. Service and maintenance ....................................................................... 42
9.1 Maintenance safety 42
9.2 Technical Support 44
9.2.1 Cleaning the press 45
9.2.2 Lubricate the prism guide 46
9.3 Packing system parts 47
9.4 Wear and spare parts lists 47
10. Faults ..................................................................................................... 48
10.1 Technical Support 49
10.1.1 Fault table 49
10.1.2 Adjusting the Adjustment Gib 50
10.1.3 Changing the return spring 51
11. Spare parts and ordering ....................................................................... 53
11.1 Spare parts 53
11.2 Order 53
12. Appendix ................................................................................................ 54
12.1 Register directory 54