GeChic On-Lap M505T/I, Руководство пользователя

Страница: 18 / 40

12
2. Use of Touch Stylus
M505T/ I doesn’t support the proprietary active styluses of other tablet PCs or smartphones.
●
Passive Touch Stylus: M505T/ I supports passive touch pens with conductive rubber tip or
plastic disc whose diameter greater than 6mm.
●
Active Touch Stylus: Stylus on the market are not identical in the magnetic flux. M505T/ I
monitor only supports some active touch styluses with sufficient electromagnetic induc-
tion.(e.g., Adonit® Dash 3).
If you cannot draw lines or work smoothly with a touch stylus due to its insufficient induction,
please refer to Chapter 3> Sections 2> Point 6 to select “50” for “Touch Sensitivity”.
3. Touch with Latex PVC Gloves and Wet Fingers
M505T/
I
supports finger touch with PVC latex gloves. Gloves thickness ≤ 1mm is recommend-
ed.
M505T/ I monitor is touchable with wet fingers (without any water drop on the surface).
1. Touch Screen Settings on Windows 10/ 7
If the computer does not enable
touchscreen function automatically or the
monitor doesn’t sense touch position accu-
rately, please use Windows 10/7 “Tablet PC
Settings” in “Control Panel” to start touch
screen setting.
In Windows 10, search “Calibrate” and
select “Calibrate the screen for pen or
touch input” .
In Windows 7, click ”Tablet PC Settings” in
“Control Panel” to start touch screen
settings.
In the Fig. shown, please select “Setup”.
When the display shows on - screen instruc-
tions on On - Lap
M505
T/ I , touch On - Lap
M505 T/ I to complete touch screen setting.