GeChic On-Lap M505T/I, Руководство пользователя

Страница: 5 / 40

LCD Pixel Statement
(1)The bar code has been removed or worn down, and cannot be identified.
(2)This product has been modified, disassembled, or refitted.
(3)Display and touch function working normally; only variation in appearance
(i.e., ageing, attrition, scratch, color changing and etc.).
(4)Any breakdown caused by power supply. (i.e., inputting power over 5V or
unsteady current)
(5)Any damage caused by disoperation or failure to follow this manual. (i.e., Plug
or unplug the cable in wrong direction and causing damage on cable or moni-
tor.)
(6)Any damage caused by hitting or cracking monitor accidentally or
purposely, or collapsing or overturning monitor.
II
There is slightly uneven brightness on the screen when displaying different
screen pattern. The LCD screen has 99.99% or more effective pixels. 0.01% of
pixels or less may not light or may light incorrectly. The On
- Lap monitor uses a
high quality LCD panel. Nevertheless, pixels on the LCD screen may not light or
appear as red or black dots. All the above are normal with the LCD monitor and
will not affect the normal usage of the product.
Avoid placing the monitor against sun - light, or it may damage the monitor.
An afterimage of the previous screen may remain, when the same image is
displayed for hours. In this case, the screen is recovered slowly by turning off
the power for a few hours.
Notice: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15 B of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
If this equipment does cause harmful interference to radio or television re-
ception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and receiver.
■
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
■
Consult the dealer or an experienced radio/TV technician for help.
Caution:
1. Changes or modifications not expressly approved by GeChic Corp. could
void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order
to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. It is the responsi-
bilities of the user to correct such interference.
Federal Communications Commission (FCC)
Class B Statement