GeChic On-Lap M505T/I, Руководство пользователя

Страница: 12 / 40

6
Notice 1
:
To use Joy - Con while Switch® console outputs video signals to the monitor, please
detach Joy - Con controllers from Nintendo Switch® console.
Notice2: After finishing the games, please unplug the USB Type - C video cable and then turn
off Switch® console. Otherwise, the battery power of Switch® will run out gradually. Since the
power supply is interrupted, the Switch® console will boot automatically and run out all the
battery power by time.
Notice 3: When Switch runs out of power, it cannot be connected to the monitor. Please
insert the 65W PD power adapter into Switch® console to charge it for 10 minutes and then
connect to monitor by following the steps above.
Section 4 Connect to Computer by the HDMI IN Port
1. Connect to USB - A Port on a PC to Transmit Power and Touch Signals
○
1
Insert both USB - A connectors of USB - A to USB - C Power& Touch Signal Cable(1.2m) into
the USB - A ports on the PC and insert USB - C connector into the USC - C port on M505(Not DC
IN port). (Caution: If only connecting to single USB - A port on the PC, M505 may not boot
due to insufficient power.)
○
2
Insert HDMI - A Video Cable(1.2m) to connect computer and the HDMI IN port on the
monitor.
2. Use Power Adapter to Transmit Power
○
1
Use 5V 2A Power Adapter and USB - A to USB - C Power& Touch Signal Cable(1.2m) connect
to the DC IN port on M505T.(For M505 I , please refer to Section 3 for connecting the 65W PD
power adapter.)
○
2
Insert HDMI - A Video Cable(1.2m) to connect computer and the HDMI IN port on M505
monitor.
○
3
Use USB Type - C Video Cable(1m) to connect to the USB - C ports on the PC and the monitor
for transmitting touch signal.
Notice
:
The USB - C Port (with symbol) on the PC doesn’t support PD power specifi-
cation, which means the USB port cannot provide sufficient power to M505 monitor. The
monitor may not be turned on.
1
2
(Not Apply to M505T)