Geberit Piave, Руководство по обслуживанию

Страница: 39 / 52

99079193583897099 © 03-2022
971.197.00.0(00)
39
Make settings with the Geberit App
After connecting a Geberit app to the device, the following functions and settings are available:
• Operation:
– Flushing: Activating a flush
– Cleaning: Suppressing the flush actuation for a few minutes
• Setting parameters and functions → See the ‘Settings’ table
• Displaying device information such as the battery capacity or firmware version → See the ‘Information’
table
• Displaying statistical values for use → See the ‘Information’ table
• Exporting device information and statistical values
• Displaying error messages
• Carrying out firmware updates
• Saving and transferring presettings
The settings can be saved in the Geberit App as presettings and transferred to other devices.
Table 3: Settings
Menu item Description Application Area Factory
setting
Operation
[Flush]
Actuate flush
Flushes until the flush is stopped
again (max. 10 minutes).
• To run a function test
on the solenoid valve
• To flush out standing
water (stagnation)
• To disinfect the line
system and the tap
(> 3 min at > 70 C)
• To carry out winter
emptying
On/Off –
[Cleaning]
Activate cleaning mode
The flush actuation is suppressed
for the [cleaning time].
• To clean the tap and
the washbasin without
the water running On/Off –
[Cleaning time] – 1–20 min 10 min