Geberit Piave, Руководство по обслуживанию

Страница: 17 / 52

99079193583897099 © 03-2022
971.197.00.0(00)
17
11
Mount the power supply unit, battery
compartment or rechargeable battery and
snap the power supply cable into the
bracket.
12
Connect the cable to the control electronics.
→ See figure sequence
3 , page 48.
13
Mount the control electronics.
14
Open both shut-off units or angle stop
valves.
15
Test the function of the tap.
16
Mount the cover plate. → See figure
sequence
4 , page 49.
Replacing the IR sensor of the
deck-mounted tap
1
Detach the cover plate. → See figure
sequence
1 , page 45.
2
Close both shut-off units or angle stop
valves. → See figure sequence
2 ,
page 47.
3
Actuate the flush to relieve the pressure.
4
Demount the control electronics.
5
Disconnect all cables.
6
Loosen the screws of the hose holder and
demount it.