Geberit Piave, Руководство по обслуживанию

Страница: 14 / 52

14
99079193583897099 © 03-2022
971.197.00.0(00)
10
Mount the power supply unit, battery
compartment or rechargeable battery and
snap the power supply cable into the
bracket.
11
Connect the cable to the control electronics.
→ See figure sequence
3 , page 48.
12
Mount the control electronics.
13
Open both shut-off units or angle stop
valves.
14
Test the function of the tap.
15
Adjust the water temperature. → See
operation manual 967.455.00.0.
16
Mount the cover plate. → See figure
sequence
4 , page 49.
Replace the solenoid valve
1
Detach the cover plate. → See figure
sequence
1 , page 45.
2
Close both shut-off units or angle stop
valves. → See figure sequence
2 ,
page 47.
3
Actuate the flush to relieve the pressure.
4
Demount the control electronics.
5
Disconnect all cables.
6
Remove the power supply cable from its
bracket and demount the power supply unit,
battery compartment or rechargeable
battery.