Geberit Piave, Руководство по обслуживанию

Страница: 34 / 52

34
99079193583897099 © 03-2022
971.197.00.0(00)
Menu item
[EN]
[DE] Description Application Area Factory setting
24
[CleanMode]
[Reinigung]
Activate cleaning mode
The flush actuation is
suppressed for 10 minutes.
The function can be stopped
early by re-establishing the
connection with the Geberit
Service Handy.
• To clean the tap and
the washbasin without
the water running
Start = <OK>
Stop = <OK>
–
Programmes
30
[MainProgr]
[Hauptmenü]
Operation mode
• Normal operation: The tap
flushes as long as an object
is in the detection range. A
run-on time (menu item 43)
can be set if necessary.
• Water saver: The tap flushes
with a restricted time (menu
item 44).
• To reduce the water
consumption
[A] = Normal
operation
[B] = Water
saver
Normal
operation
31
[Esaver]
[E Sparen]
Economy mode
The reaction speed of the IR
sensor reduces after the
starting time has elapsed
(menu item 40). The starting
time starts after the last use.
• To extend the battery
lifetime
On = [ON]
Off = [OFF]
Off
34
[IntFlush]
[IntervSp]
Interval flush
• User-controlled: A flush is
actuated at the end of the
[flush interval] (menu item
42), whereby the flush
interval is restarted with
every use. The flush time is
determined by the [interval
flush flush time] (menu item
41) value.
• Interval-controlled: A flush is
actuated at the end of the
[flush interval] (menu item
42), regardless of the number
of uses. The flush time is
determined by the [interval
flush flush time] (menu item
41) value.
• To fill the trap in the
case of low user
frequencies
• To flush out standing
water in the pipe
(hygiene function – to
prevent stagnation)
[0] = Off
[1] = User-
controlled
[2] = Interval-
controlled
User-
controlled
2 / 4