DIVERTER TRIM KIT
Installation
Instructions
M 9 6 8 6 6 1
M 9 6 8 6 6 1
M 9 6 8 6 6 1
ENFIELD
ENFIELD
DIVERTER TRIM KIT
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1
ROUGHING-IN DIMENSIONS
MODEL NUMBERS
OPERATING THE VALVE
1
Place ESCUTCHEON
(1)
onto ESCUTCHEON HOLDER
(2).
Align ESCUTCHEON
(1).
Thread ESCUTCHEON HOLDER
(2)
onto DIRVERTER VALVE
(3)
.
Tighten until ESCUTCHEON
(1)
is snug against fiished wall.
TRIM INSTALLATION
1
2
3
2
HANDLE INSTALLATION
Recommended Tools
Flat Blade Screwdriver
Phillips Screwdriver
Remove as much surface dirt and film using clear
water and soft cotton cloth (as described above).
Use any of the following to remove tough surface
film and build-up:
Mild liquid detergents
Clear ammonia free liquid glass cleaners
Non-acidic, non-abrasive gentle liquid or fully
dissolved powder cleansers mixed according to
manufacturers directions.
Non-abrasive liquid polishers
Once clean, rinse faucet again with clear water to
thoroughly remove cleaner or polish and blot dry with
a soft cotton cloth.
To keep your new faucet looking new, please follow
these simple care instructions:
DO:
Simply rinse the faucet clean with clear water.
Dry the faucet with a soft cotton cloth.
DO NOT:
Do not use any abrasive cleaners, cloths, or
paper towels.
Do not use any cleaning agents containing
acids, polish abrasives, or harsh cleaners or
soaps.
Regular and routine cleaning will reduce the need for
heavy cleaning and polishing. If heavy cleaning is
required, the following procedures are recommended:
CARE INSTRUCTIONS:
Failure to follow these care instructions may
damage the Faucet's finish.
3
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Weekdays 8:00 a.m. to 6:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
Product names listed herein are trademarks of American Standard Inc.
© AS America, Inc. 2008
IN MEXICO 01-800-839-12-00
Turn water supply on and test installed fitting.
Rotate handle to all diverter positions to check operation of valve.
Check for leaks.
012288-YYY0A
ESCUTCHEON KIT
954027-YYY0A
ESCUTCHEON HOLDER
2
CHROME
POLISHED NICKEL
BLACKENED BRONZE
SATIN NICKEL
002
008
068
295
Replace the "YYY" with
appropriate finish code
ALL CONNECTIONS 1/2" NPT
FINISHED
WALL
FINISHED
WALL
41mm MIN.
(1-5/8)
66mm MAX.
(2-5/8)
71mm
(2-3/4)
57mm HOLE SIZE
(2-1/4)
70mm
(2-5/8)
A923348-0070A
HANDLE ADAPTER
M950118-YYY420A
LEVER HANDLE
(T373430)
M918318-0070A
HANDLE SCREW
M950119-YYY420A
CROSS HANDLE
(T373432)
1
Install KNOB MOUNT
(1)
onto VALVE STEM
(2)
. Thread HANDLE SCREW
(3)
into VALVE STEM
(2)
and tighten.
Align HANDLE
(4, 4a)
and push onto KNOB MOUNT
(1)
.
Tighten SET SCREW in HANDLE
(4, 4a)
with HEX WRENCH
(5)
SUPPLIED.
3
4
5
SET SCREW
4a
T373430
T373432
OFF
T373430
T373432
