GEA FLOWVENT, Инструкция по эксплуатации, Страница: 31 / 84

5.5 Switching point tolerances and signal output
5.5.1 Switching point tolerances
Fig.12: DIP switch setting for valves without air
support.
Fig.13: DIP switch setting for valves with air
support.
Signal processing
DIP 2 DIP 3 DIP 4 Tolerance Valve type
0 0 0 0.7 mm Seat valve*
0 1 1 1.0 mm Valves with air support (D33+L)
* Factory setting
Hint!
Only use the DIP switch configurations shown. Further positions lead
to non-intended use.
5.5.2 Signal output
Main stroke - signal output
Pilot valve actuation Valve position DIP switch Illumination Feedback
PV Y1 PV Y2 PV Y3 1 Green Yellow S1 S2
0 0 0 not actuated 0 1 0 1 0
1 0 0 Main stroke / stroke in S1 tolerance 0 1 0 1 0
1 0 0 Main stroke / stroke movement 0 0 1Hz 0 0
1 0 0 main stroke / stroke in S2 tolerance 0 0 1 0 1
0 0 0 main stroke / stroke in S2 tolerance 0 0 1 0 1
0 0 0 Main stroke / stroke movement 0 1Hz 0 0 0
0 0 0 not actuated 0 1 0 1 0
Lower lift stroke - signal output
Pilot valve actuation Valve position DIP switch Illumination Feedback
PV Y1 PV Y2 PV Y3 1 Green Yellow S1 S2
0 1 0 lower lift stroke actuated 0 1 0 1 0
Technical data
Switching point tolerances and signal output
430BAL014912EN_3
25.01.2024 31