GEA Aseptomag GD, Инструкция по эксплуатации

Страница: 41 / 66

Fig.31: Extend the piston rod with the groove upwards.
2. Lift the internal assembly slightly to detach it from the T-slot on the drive
spindle.
Fig.32: Unhooking the internal assembly
3. Remove the housing seal without a tool.
! Do not damage the sealing surfaces on the housing and internal
assembly.
Fig.33: Removing housing gasket
®
The internal assembly has been disassembled.
10.7.2 Assembling the Internal Assembly
Carry out the following steps:
1.
Install the internal assembly in the reverse order of disassembly, see
Section 10.7.1, Page 40.
®
The internal assembly has been assembled.
Maintenance
Disassembling and Assembling the Internal Assembly
430BAL012727EN_1
03.01.2018 41