GEA Aseptomag GD, Инструкция по эксплуатации

Страница: 38 / 66

1.
Drain all pipe system elements that lead to the valve and, if necessary, clean
or rinse, and also depressurize them.
2. Shut off the control air supply.
3.
Disconnect the power supply.
®
Disassembly has been prepared.
10.6 Disassembling and Assembling the Valve
10.6.1 Disassembling the Valve
Tools required:
• Hex socket key
Caution!
Danger of injury due to media escaping after removing the clamp
You can sustain injuries to your entire body if you open a valve that is still
under pressure from the medium.
► Ensure that the valve is no longer under medium pressure before
removing the clamp.
► Wear suitable protective clothing for all work.
► Always exercise caution and prudence.
Carry out the following steps:
1. Bring the valve to the "open" position.
Fig.28: Open valve
2.
Release the clamp with a suitable hex socket key, but do not unhook the
screw yet.
Maintenance
Disassembling and Assembling the Valve
430BAL012727EN_1
38 03.01.2018