manualshive.com logo in svg

GE UR T60, Инструкция по эксплуатации

Инструкция по эксплуатации для продукта GE UR T60 доступна для бесплатного скачивания на нашем веб-сайте. Здесь вы найдете все необходимые инструкции и советы по использованию устройства. Не забудьте загрузить свой мануал с manualshive.com.

Поделиться
Скачать
background image

8-6

T60 Transformer Protection System

GE Multilin

8.2 SETTINGS SECURITY

8 SECURITY

8

8.2SETTINGS SECURITY

8.2.1 SETTINGS TEMPLATES

Setting file templates simplify the configuration and commissioning of multiple relays that protect similar assets. An exam-
ple of this is a substation that has ten similar feeders protected by ten UR-series F60 relays.

In these situations, typically 90% or greater of the settings are identical between all devices. The templates feature allows
engineers to configure and test these common settings, then lock them so they are not available to users. For example,
these locked down settings can be hidden from view for field engineers, allowing them to quickly identify and concentrate
on the specific settings.

The remaining settings (typically 10% or less) can be specified as editable and be made available to field engineers install-
ing the devices. These will be settings such as protection element pickup values and CT and VT ratios.

The settings template mode allows the user to define which settings will be visible in EnerVista UR Setup. Settings tem-
plates can be applied to both settings files (settings file templates) and online devices (online settings templates). The func-
tionality is identical for both purposes.

The settings template feature requires that 

both

 the EnerVista UR Setup software and the T60 firmware are at ver-

sions 5.40 or higher.

a) ENABLING THE SETTINGS TEMPLATE

The settings file template feature is disabled by default. The following procedure describes how to enable the settings tem-
plate for UR-series settings files.

1.

Select a settings file from the offline window of the EnerVista UR Setup main screen.

2.

Right-click on the selected device or settings file and select the 

Template Mode > Create Template

 option.

The settings file template is now enabled and the file tree displayed in light blue. The settings file is now in template editing
mode.

Alternatively, the settings template can also be applied to online settings. The following procedure describes this process.

1.

Select an installed device from the online window of the EnerVista UR Setup main screen.

2.

Right-click on the selected device and select the 

Template Mode > Create Template

 option.

The software will prompt for a template password. This password is required to use the template feature and must be
at least four characters in length.

3.

Enter and re-enter the new password, then click 

OK

 to continue.

The online settings template is now enabled. The device is now in template editing mode.

b) EDITING THE SETTINGS TEMPLATE

The settings template editing feature allows the user to specify which settings are available for viewing and modification in
EnerVista UR Setup. By default, all settings except the FlexLogic™ equation editor settings are locked.

1.

Select an installed device or a settings file from the tree menu on the left of the EnerVista UR Setup main screen.

2.

Select the 

Template Mode > Edit Template

 option to place the device in template editing mode.

3.

Enter the template password then click 

OK

.

4.

Open the relevant settings windows that contain settings to be specified as viewable.

NOTE

Содержание UR T60





















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для UR T60

Philips Magnavox 9P5540C Specification Sheet preview
Magnavox 9P5540C
Бренд: Philips Страницы: 2
Philips Magnavox 9P5544C Specification Sheet preview
Magnavox 9P5544C
Бренд: Philips Страницы: 2
Philips Magnavox 9P5531C Specification Sheet preview
Magnavox 9P5531C
Бренд: Philips Страницы: 2
Philips Magnavox 9P5534C Specification Sheet preview
Magnavox 9P5534C
Бренд: Philips Страницы: 2
Philips Magnavox 9P5511C Instructions For Use Manual preview
Magnavox 9P5511C
Бренд: Philips Страницы: 40
FIRE FLEX TOTALPAC2 Quick Start Manual preview
TOTALPAC2
Бренд: FIRE FLEX Страницы: 6
Superfire EP5 Sonic Defenders Max Manual preview
EP5 Sonic Defenders Max
Бренд: Superfire Страницы: 2
LG DU-52SX4D-UB Owner'S Manual preview
DU-52SX4D-UB
Бренд: LG Страницы: 29
ABB Relion REQ650 Commissioning Manual preview
Relion REQ650
Бренд: ABB Страницы: 150
i4Technology BugHunter micro mk-01 Operating Manual preview
BugHunter micro mk-01
Бренд: i4Technology Страницы: 6
Ditek DTK-LC2 User Manual preview
DTK-LC2
Бренд: Ditek Страницы: 2
Novus NVS-021VPSD-HD User Manual preview
NVS-021VPSD-HD
Бренд: Novus Страницы: 16
Micom P721 Technical Manual preview
P721
Бренд: Micom Страницы: 334
Micom P631 Technical Manual preview
P631
Бренд: Micom Страницы: 638
Monacor 12.2850 Instruction Manual preview
12.2850
Бренд: Monacor Страницы: 12
Helite E-TURTLE User Manual preview
E-TURTLE
Бренд: Helite Страницы: 52
Furse ESP Cat-5 Series Technical Note preview
ESP Cat-5 Series
Бренд: Furse Страницы: 2
Euroflex SPRINGLIGHT HCXS49 Operating Instructions Manual preview
SPRINGLIGHT HCXS49
Бренд: Euroflex Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды