manualshive.com logo in svg

GE UR T60, Инструкция по эксплуатации

Инструкция по эксплуатации для продукта GE UR T60 доступна для бесплатного скачивания на нашем веб-сайте. Здесь вы найдете все необходимые инструкции и советы по использованию устройства. Не забудьте загрузить свой мануал с manualshive.com.

Поделиться
Скачать
background image

5-56

T60 Transformer Protection System

GE Multilin

5.2 PRODUCT SETUP

5 SETTINGS

5

It can also be programmed to reset automatically through the 

PUSHBTN 1 AUTORST

 and 

PUSHBTN 1 AUTORST DELAY

 set-

tings. These settings enable the autoreset timer and specify the associated time delay. The autoreset timer can be
used in select-before-operate (SBO) breaker control applications, where the command type (close/open) or breaker
location (feeder number) must be selected prior to command execution. The selection must reset automatically if con-
trol is not executed within a specified time period.

•

Self-reset mode

: In self-reset mode, a pushbutton will remain active for the time it is pressed (the 

pulse duration

) plus

the dropout time specified in the 

PUSHBTN 1 DROP-OUT TIME

 setting. If the pushbutton is activated via FlexLogic™, the

pulse duration is specified by the 

PUSHBTN 1 DROP-OUT TIME

 only. The time the operand remains assigned to the 

PUSH-

BTN 1 SET

 setting has no effect on the pulse duration.

The pushbutton is reset (deactivated) in self-reset mode when the dropout delay specified in the 

PUSHBTN 1 DROP-OUT

TIME

 setting expires.

The pulse duration of the remote set, remote reset, or local pushbutton must be at least 50 ms to operate the push-
button. This allows the user-programmable pushbuttons to properly operate during power cycling events and vari-
ous system disturbances that may cause transient assertion of the operating signals.

The local and remote operation of each user-programmable pushbutton can be inhibited through the 

PUSHBTN 1 LOCAL

 and

PUSHBTN 1 REMOTE

 settings, respectively. If local locking is applied, the pushbutton will ignore set and reset commands

executed through the front panel pushbuttons. If remote locking is applied, the pushbutton will ignore set and reset com-
mands executed through FlexLogic™ operands.

The locking functions are not applied to the autoreset feature. In this case, the inhibit function can be used in SBO control
operations to prevent the pushbutton function from being activated and ensuring “one-at-a-time” select operation.

The locking functions can also be used to prevent the accidental pressing of the front panel pushbuttons. The separate
inhibit of the local and remote operation simplifies the implementation of local/remote control supervision.

Pushbutton states can be logged by the event recorder and displayed as target messages. In latched mode, user-defined
messages can also be associated with each pushbutton and displayed when the pushbutton is on or changing to off. 

•

PUSHBUTTON 1 FUNCTION

: This setting selects the characteristic of the pushbutton. If set to “Disabled”, the push-

button is not active and the corresponding FlexLogic™ operands (both “On” and “Off”) are de-asserted. If set to “Self-
Reset”, the control logic is activated by the pulse (longer than 100 ms) issued when the pushbutton is being physically
pressed or virtually pressed via a FlexLogic™ operand assigned to the 

PUSHBTN 1 SET

 setting.

When in “Self-Reset” mode and activated locally, the pushbutton control logic asserts the “On” corresponding Flex-
Logic™ operand as long as the pushbutton is being physically pressed, and after being released the deactivation of
the operand is delayed by the drop out timer. The “Off” operand is asserted when the pushbutton element is deacti-
vated. If the pushbutton is activated remotely, the control logic of the pushbutton asserts the corresponding “On” Flex-
Logic™ operand only for the time period specified by the 

PUSHBTN 1 DROP-OUT TIME

 setting.

If set to “Latched”, the control logic alternates the state of the corresponding FlexLogic™ operand between “On” and
“Off” on each button press or by virtually activating the pushbutton (assigning set and reset operands). When in the
“Latched” mode, the states of the FlexLogic™ operands are stored in a non-volatile memory. Should the power supply
be lost, the correct state of the pushbutton is retained upon subsequent power up of the relay.

•

PUSHBTN 1 ID TEXT:

 This setting specifies the top 20-character line of the user-programmable message and is

intended to provide ID information of the pushbutton. Refer to the 

User-definable displays

 section for instructions on

how to enter alphanumeric characters from the keypad.

•

PUSHBTN 1 ON TEXT:

 This setting specifies the bottom 20-character line of the user-programmable message and is

displayed when the pushbutton is in the “on” position. Refer to the 

User-definable displays

 section for instructions on

entering alphanumeric characters from the keypad.

•

PUSHBTN 1 OFF TEXT:

 This setting specifies the bottom 20-character line of the user-programmable message and is

displayed when the pushbutton is activated from the on to the off position and the 

PUSHBUTTON 1 FUNCTION

 is

“Latched”. This message is not displayed when the 

PUSHBUTTON 1 FUNCTION

 is “Self-reset” as the pushbutton operand

status is implied to be “Off” upon its release. The length of the “Off” message is configured with the 

PRODUCT SETUP



 DISPLAY PROPERTIES 

 FLASH MESSAGE TIME 

setting.

•

PUSHBTN 1 HOLD

: This setting specifies the time required for a pushbutton to be pressed before it is deemed active.

This timer is reset upon release of the pushbutton. Note that any pushbutton operation will require the pushbutton to be
pressed a minimum of 50 ms. This minimum time is required prior to activating the pushbutton hold timer.

NOTE

Содержание UR T60





















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для UR T60

Brother HL-2600CN Series Service Manual preview
HL-2600CN Series
Бренд: Brother Страницы: 385
Brother HL-2600CN Series Driver Installation Manual preview
HL-2600CN Series
Бренд: Brother Страницы: 2
Petzl MAESTRO L Manual preview
MAESTRO L
Бренд: Petzl Страницы: 24
TOOLCRAFT EN166 Operating Instructions preview
EN166
Бренд: TOOLCRAFT Страницы: 2
3M 8210 Technical Data Sheet preview
8210
Бренд: 3M Страницы: 3
3M PELTOR H31A Manual preview
PELTOR H31A
Бренд: 3M Страницы: 112
ICON TARMAC 2 BOOT User Manual preview
TARMAC 2 BOOT
Бренд: ICON Страницы: 84
dehn HVI conductors light Installation Instructions Manual preview
HVI conductors light
Бренд: dehn Страницы: 28
Samsung SP43T8HPX/XEC Service Manual preview
SP43T8HPX/XEC
Бренд: Samsung Страницы: 93
Globalmediapro SP016C Quick Start Manual preview
SP016C
Бренд: Globalmediapro Страницы: 2
hecht KM1504002 Instructions For Use preview
KM1504002
Бренд: hecht Страницы: 4
Orvaldi 2000GE User Manual preview
2000GE
Бренд: Orvaldi Страницы: 3
Miller 198RLS User Instruction Manual preview
198RLS
Бренд: Miller Страницы: 38
Intermatic UG28 Installation Instructions And Operating Manual preview
UG28
Бренд: Intermatic Страницы: 4
Intermatic PF1100 Series Installation, Operation & Service Manual preview
PF1100 Series
Бренд: Intermatic Страницы: 4
Intermatic IG1CM Installation Instructions preview
IG1CM
Бренд: Intermatic Страницы: 4
Intermatic SG160 User Manual preview
SG160
Бренд: Intermatic Страницы: 8
Edwards SIGA-REL Technical Reference Manual preview
SIGA-REL Technical
Бренд: Edwards Страницы: 72

Бренды по названию

Популярные бренды

Загрузить еще бренды