GE Telligence Patient-Staff Communications System, Руководство по эксплуатации

Страница: 80 / 136

Chapter 4
Patient stations
74 Telligence Patient-Staff Communication System Operation Manual
Using a call cord or bed button to place a call
To use a call cord or an electronic bed‘s nurse call button to make a
nurse call:
1. Press the pushbutton or squeeze pad actuator on the end of the
call cord, or press the nurse call button on the electronic bed
side-rail panel. When you do, this happens:
•
The Call status light on the patient station turns on to confirm
nurse call placement.
•
The call assurance tone sounds at the patient station.
• Associated corridor and zone lights turn on as follows:
•
A steady white light for a patient station with a priority of
patient normal
•
Slow flashing amber for a patient station with a priority of
patient priority
•
Fast flashing amber for a patient station with a priority of
patient emergency
•
Tones sound at staff consoles and annunciators, and at
stations where staff follow is active.
•
A patient normal, patient priority, or patient emergency call
row appears on staff consoles and unit annunciators.
2. The call may be placed on reminder at the staff console, until
the staff member can answer it. When a call is placed on
reminder, this happens:
•
The Call light on the patient station slowly flashes.
•
Associated dome lights slowly flash the highest reminder
color.
3. When the call is answered at a staff console or annunciator, this
happens:
•
The Status light on the patient station shows a steady green,
indicating the audio connection.
•
The Call light on the patient station extinguishes.
•
Dome light illumination for the original call and for any
reminder ceases.
4. During the call, the patient should speak in a normal
conversational tone.
•
If the call was made using a call cord, audio communications
use the patient station or the electronic bed‘s speakers.
•
If the call was made by pressing the bed‘s nurse call button,
audio communications use either the patient station or the
electronic bed‘s speakers.
Note: If necessary, the staff member can adjust call volume
settings on the staff console or annunciator.