manualshive.com logo in svg

GE Multilin GEK-113000T, Руководство пользователя

GE Multilin GEK-113000T - Качественное устройство для защиты электрооборудования. Для полноценного использования необходимо ознакомиться с руководством пользователя. Скачайте бесплатное руководство на manualshive.com и получите всю необходимую информацию для эффективной работы устройства.

Поделиться
Скачать
background image

GEK-113000T

F650 Digital Bay Controller

3-19

3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES 3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE

3

3.1.8.4   CONTROL ELEMENTS

This option shows all the control elements available in the relay as shown in Table 3–11:. Some of the elements are
grouped ones such as underfrequency, overfrequency and broken conductor. 

Table 3–11:  GENERAL OVERVIEW OF CONTROL ELEMENTS MENU:

3.1.8.5   INPUT/OUTPUTS

Section that contains the settings for all input and output boards and the Force Outputs and Virtual inputs activation tools. 

Table 3–12:  GENERAL OVERVIEW OF “INPUTS/OUTPUTS” SETTINGS MENU. 

Options enabled only in On-line mode are marked as (*). Options enabled only in Off-line mode are marked as (**)

This section shows the settings related to inputs and outputs for the different boards available in F650 (F, G, H, J).

CONTROL 
ELEMENTS

Setting Group

F650 units incorporate a flexible grouping capability for protection units.
This means that protection units can be used in either single setting
group (default mode-all units can operate simultaneously) or three
setting groups (in this mode, protection units are grouped in three
independent tables, with only one of them active at a given time).
Protection element grouping involves only Protection elements together
with broken conductor detection and over and under frequency, which
are usually considered as control elements. The rest of control elements
such as recloser, fuse failure, breaker failure, synchronism, and breaker
settings are not involved in the tabled groups concept.

Underfrequency

Underfrequency unit (81U). Grouped element

Overfrequency

Overfrequency unit (81O). Grouped element

Synchrocheck

Synchronism check unit (25). Not grouped, a single unit provided

Autoreclose

Recloser (79). Not grouped, a single unit provided

Breaker Failure

Breaker failure (50BF). Not grouped, a single unit provided.  

VT Fuse Failure

Fuse Failure (VTFF). Not grouped, a single unit provided.  

Broken Conductor

Broken or fallen conductor detection function (I2/I1). Grouped element.
Ratio between the negative sequence current, I2, and the positive
sequence current I1. In normal and balanced load situations, this ratio is
zero, while in severe load fault conditions, an unbalance is produced and
this ratio is increased.

Locked Rotor

Locked rotor detection function (48). Grouped element.

Pulse Counters

Pulse counters function. 8 counters provided.

Analog Comparators

Analog comparator function. 20 analog comparators provided.

Frequency rate of 
change

Frequency rate of change function (81R).Grouped element.

Load Encroachment

Load Encroachment function. Grouped element.

INPUTS/
OUTPUTS

Contact I/O

Inputs and outputs settings for all boards in F650. The I/O settings
configuration can only be performed through EnerVista 650 Setup, not
HMI available.

Force Outputs (*)

This menu allows activating each contact output in the relay, to facilitate
maintenance testing. On line mode only. 

Virtual Inputs (*)

This menu allows operating virtual inputs. These variables are used as
inputs to logic schemes configured in the relay. Virtual inputs can be
operated in a latched mode (32 latched virtual inputs) or in Self-reset
mode (32 self reset virtual inputs).

Remote Comms.

This menu allows configuring remote inputs coming from other devices
through GSSE messages. Available for IEC61850 (6) models only.

Содержание Multilin GEK-113000T




































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Multilin GEK-113000T

Walchem W100 Troubleshooting Manual preview
W100
Бренд: Walchem Страницы: 10
IBM 1620 Manual Of Instruction preview
1620
Бренд: IBM Страницы: 12
K&K M9700 Installation Instructions Manual preview
M9700
Бренд: K&K Страницы: 10
dbx DriveRack PA User Manual preview
DriveRack PA
Бренд: dbx Страницы: 52
Hankscraft Runxin HS Series Service Manual preview
HS Series
Бренд: Hankscraft Runxin Страницы: 58
Hama Black Thunder Operating Instruction preview
Black Thunder
Бренд: Hama Страницы: 8
Paradox Digiplex DGP-848 Reference And Installation Manual preview
Digiplex DGP-848
Бренд: Paradox Страницы: 20
Samson TROVIS 3730-1 Installation Instructions Manual preview
TROVIS 3730-1
Бренд: Samson Страницы: 6
L-Acoustics LA8 Product Information preview
LA8
Бренд: L-Acoustics Страницы: 20
Valco baby ZEE Product Reference Manual preview
ZEE
Бренд: Valco baby Страницы: 8
Purmo NC 24 V Assembly Instructions preview
NC 24 V
Бренд: Purmo Страницы: 2
salmson ACSON VARIO Installation And Starting Instructions preview
ACSON VARIO
Бренд: salmson Страницы: 78
D+H DXD 150-BSY+ Original Instructions Manual preview
DXD 150-BSY+
Бренд: D+H Страницы: 16
Case IH MAXXUM 100 Service Manual preview
MAXXUM 100
Бренд: Case IH Страницы: 81
NXP Semiconductors MPC560xB User Manual preview
MPC560xB
Бренд: NXP Semiconductors Страницы: 39
Elo TouchSystems 4 I Series Quick Installation Manual preview
4 I Series
Бренд: Elo TouchSystems Страницы: 2
Daikin BRC1H81W Installer And User Reference Manual preview
BRC1H81W
Бренд: Daikin Страницы: 40
Carel EVD mini User Manual preview
EVD mini
Бренд: Carel Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды