manualshive.com logo in svg

GE Multilin GEK-113000T, Руководство пользователя

GE Multilin GEK-113000T - Качественное устройство для защиты электрооборудования. Для полноценного использования необходимо ознакомиться с руководством пользователя. Скачайте бесплатное руководство на manualshive.com и получите всю необходимую информацию для эффективной работы устройства.

Поделиться
Скачать
background image

GEK-113000T

F650 Digital Bay Controller

3-23

3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES 3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE

3

3.1.9 ACTUAL VALUES MENU OVERVIEW

The menu bar in the main screen of EnerVista 650 Setup software shows the ACTUAL menu option. This option
concentrates and displays all the status of protection, control elements, metering, counters information, oscillography,
events, fault locator, etc. This section shows only the structure of menus in EnerVista 650 Setup.

Table 3–15:  GENERAL OVERVIEW OF ACTUAL VALUES MAIN MENU:

3.1.9.1   FRONT PANEL

The front panel menu shows only the LEDs submenu where all the front LEDs can be monitored.

3.1.9.2   STATUS

The following menu includes all the available protection status in the device.

Table 3–16:  GENERAL OVERVIEW OF STATUS MENU:

ACTUAL

Front Panel

The relay front LEDs status is shown on this menu.

Status

Protection and control status signals for all available protection functions
in device.

Metering

All metering values available in device. Primary and secondary values,
frequency and phasor diagram provided.

Inputs/Outputs

All input and output status provided. For contact inputs and contact
outputs as well as virtual input and virtual output signals.

Records

Only enabled in on line mode, retrieval of all the available records in
device. Snapshot events, control events, oscillography and fault reports.

STATUS

Operation bits

Up to 24 elements. OPERATION BIT XX is (0) when the configured time
out for the operation XX expires or when success conditions are met.
And it is (1) if operation XX is executed and interlocks are fulfilled.

Breaker

Breaker status (open, closed or undefined). The rest of the status signals
corresponding to the switchgear XX configured as breaker are in the
“

Status>Switchgear Status>Switchgear XX

” menu.

Protection

Status of all the protection units in the device.

Control Elements

Status of all the control units available in the device. 

Protection Summary

This screen shows a complete list of all protection and control elements
in the relay, showing their status (enabled or not). 

Snapshots events 
summary

Summary of the snapshot events status (enabled or disabled) for
protection, control, inputs and outputs boards and switchgear. 

ModBus User Map

Up to 256 elements. Value in SIGNED INT 16 BIT format of the reading
for the selected address configured in “

Setpoint>Product

Setup>ModBus User Map

”

Switchgear Status

Up to 16 blocks of switchgear status signals for the 16 configurable
devices. Status signals such as inputs for A and B contacts, status for A
and B, open and close status, error 00 and error 11, open init and close
init, fail to open and fail to close signals.

Calibration

Internal states for calibration. Factory calibration and calibration error
signals.

Flex Curves

Flex curve status for A, B, C and D user curves. (0) if it is not configured,
(1) if it is configured. To configure a flex curve go to “

Setpoint>System

Setup>Flex Curves

” menu.

System Info

This screen can monitor the system parameters and the internal status of
the Relay operative system. Not enabled by default, password required

Records Status

Information related to the different records stored in the Relay, such as:
Fault reports, control events, oscillography, data logger, demand, energy,
and breaker maintenance.

SNTP-IRIG-B

Information related to synchronization via IRIG_B or SNTP

Содержание Multilin GEK-113000T




































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Multilin GEK-113000T

T-Verter E2 Series Operating Manual preview
E2 Series
Бренд: T-Verter Страницы: 121
Happy 1050 Installation & Use Instructions preview
1050
Бренд: Happy Страницы: 10
Saab R5 SUPREME AIS Short Instruction preview
R5 SUPREME AIS
Бренд: Saab Страницы: 4
Dantherm CC 3000 Manual preview
CC 3000
Бренд: Dantherm Страницы: 20
Bardiani Valvole BBZO BBZOG Instruction Manual preview
BBZO BBZOG
Бренд: Bardiani Valvole Страницы: 24
ITALCOPPIE SENSORI EVOMINI SCAT A Quick Start Manual preview
EVOMINI SCAT A
Бренд: ITALCOPPIE SENSORI Страницы: 2
R for Rabbit Poppins Plus Instruction Manual preview
Poppins Plus
Бренд: R for Rabbit Страницы: 2
Radionics D9024 Manual preview
D9024
Бренд: Radionics Страницы: 18
Renogy Rover 100A Manual preview
Rover 100A
Бренд: Renogy Страницы: 36
Samlex Solar DC-BTS-A-C Owner'S Manual preview
DC-BTS-A-C
Бренд: Samlex Solar Страницы: 3
Dataq DI-1000TC User Manual preview
DI-1000TC
Бренд: Dataq Страницы: 26
Anritsu NF7600 Series Operation Manual preview
NF7600 Series
Бренд: Anritsu Страницы: 74
Adaptec ASR-2045 Important Information About Issues And Errata preview
ASR-2045
Бренд: Adaptec Страницы: 4
Fronius RC Panel Pro Operating Instructions Manual preview
RC Panel Pro
Бренд: Fronius Страницы: 8
CAME ZLJ24 Installation Manual preview
ZLJ24
Бренд: CAME Страницы: 128
Jackson Systems Comfort System Z-300-HC Installation Instructions preview
Comfort System Z-300-HC
Бренд: Jackson Systems Страницы: 2
Stramatel SC24 AUTONOM Operating Instructions Manual preview
SC24 AUTONOM
Бренд: Stramatel Страницы: 10
GIESSE RACK MAX 650 Instruction And Installation Manual preview
RACK MAX 650
Бренд: GIESSE Страницы: 136

Бренды по названию

Популярные бренды

Загрузить еще бренды