MDS 05-3438A01, Rev. F
MDS 4790/9790 Series I/O Guide
33
•
Table 9
(
Page 36
) summarizes commands for
obtaining information about the unit
.
Refer to
Section 6.3,
Detailed Command Descriptions, beginning on
Page 37
for detailed information about these commands.
Commands and Command Parameters
You can use most commands in two ways:
Typing
only
the command:
For example: REPEATER
displays the current information.
Typing the command, followed by a space and a parameter value:
For example: REPEATER ON
implements a radio parameter change. Parameters and their meanings
are listed in the summary tables, as well in the detailed command
descriptions which follow.
The following conventions are used in the tables:
• Command parameters, if any, are shown in brackets [ ] follow-
ing the command entry.
• A string of lower-case “x”s in a command parameter stands for
a letter or number key.
• “xxx.xxxxx” stands for a decimal number (the decimal point
position might vary).
• “mm,” “dd,” and “yyyy” stand for month, day and year, respec-
tively (the number of characters used for month and year might
vary).
• “hh,” “mm,” and “ss” stand for hours, minutes and seconds,
respectively.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx
