GE LOGIQworks, Базовое руководство по обслуживанию

Страница: 206 / 420

GE M
EDICAL
S
YSTEMS
D
IRECTION
5184024-100, R
EVISION
5 LOGIQ
WORKS
B
ASIC
S
ERVICE
M
ANUAL
3-140 Section 3-5 - Configuration
3-5-4-5 Maintenance
(cont’d)
•
Max. No. Receive Log Records:
Maximum number of Receive Log records. This number is used
when maintenance becomes active. If the number of records in the Receive Log exceeds the
specified number, the oldest records will be deleted from the Receive Log until the required
maximum is reached. Setting this number to zero (as shown) will disable maintenance for the Send
Log. (Default: 500)
•
Thread Priority:
Priority of the maintenance thread within the Connection Service. Changing this
setting can influence the system performance. (Default: IDLE)
•
Time Out DICOM Storage Commitment (h):
Number of hours LOGIQworks will wait for a DICOM
Storage Commitment response before timing out.
3-5-4-6 Receive
This tab contains a collection of settings that control the 'receive' behavior of the Connection Service.
The Receive tab contains the general receive parameters and parameters specific for receiving in AMI
format. The DICOM format receive parameters can be found on the DICOM tab.
Only alter default settings if strictly necessary.
To view these receive parameters:
1.) Select
Configuration
>
Connection Service...
from the Data Selector menu.
2.) Select the Receive tab from the Connection Service Properties page.