GE LOGIQ 180, Базовое руководство по обслуживанию

Страница: 28 / 162

GE M
EDICAL
S
YSTEMS
D
IRECTION
2317229, R
EVISION
3
LOGIQ™ 180 B
ASIC
S
ERVICE
M
ANUAL
1 - 8 Section 1-3 - Safety Considerations
1-3-3 Mechanical Safety
NOTE: Special care should be taken when transporting the unit in a vehicle:
• Secure the unit in an upright position.
• Lock the wheels (brake)
• DO NOT use the Control Panel as an anchor point.
• Place the probes in their carrying case.
1-3-4 Electrical Safety
To minimize shock hazard, the equipment chassis must be connected to an electrical ground. The
system is equipped with a three-conductor AC power cable. This must be plugged into an approved
electrical outlet with safety ground. If an extension cord is used with the system, make sure that the total
current rating of the system does not exceed the extension cord rating.
The power outlet used for this equipment should not be shared with other types of equipment.
Both the system power cable and the power connector meet international electrical standards.
WARNING WARNING
When the unit is raised for a repair or moved along any incline, use extreme caution
since it may become unstable and tip over.
WARNING WARNING
Ultrasound probes are highly sensitive medical instruments that can easily be damaged
by improper handling. Use care when handling and protect from damage when not in
use. Do not use a damaged or defective probe. Failure to follow these precautions can
result in serious injury and equipment damage.
WARNING WARNING
Never use a probe that has fallen to the floor. Even if it looks ok, it may be damaged.
CAUTION
The LOGIQ™ 180 weights 70kg or more, depending on installed peripherals, when ready for use.
Care must be used when moving it or replacing its parts. Failure to follow the precautions listed
below could result in injury, uncontrolled motion and costly damage.