12
D0404SG0_B
KTD-404 Controller Keypad Installation and Operations Guide
After the entry, the display will automatically advance to the next menu:
NOTE:
In some applications, a user may prefer to have the monitors numbered simply as
1, 2, 3, etc., instead of using the matrix switcher output number. To allow for
the difference in numbers, simply subtract the desired monitor number from the
matrix switcher output number, and enter the result as the monitor offset.
Example:
Suppose a keypad has a monitor that is connected to matrix switcher
output #12. To enable the monitor to be addressed as Monitor #1, subtract 1 from
12 and enter the result (11) as the monitor offset.
(Matrix Switcher Number) - (Monitor Number) = (Offset)
(12) - (1) = (11)
In this particular example, if more than one monitor were to be controlled from the
keypad, additional monitors would be connected to matrix switcher outputs 13, 14,
15, etc. and would be controlled as Monitor 2, Monitor 3, Monitor 4, etc.
The keypad will deny any monitor offset number that conflicts with Largest Monitor and
Monitor Access programming choices that were made earlier in this section (Refer to Step
4 and Step 6).
Step 12)
When placed in the annunciation mode, the KTD-404 will annunciate call-in
requests generated by access control receivers or a KTD-463 Alarm Chassis. In
this mode, the keypad will stack 32 calls in the order in which they are received.
Annunciation will change the LCD menu on the Normal Operating Display. The
numbers of the first three sites to call in will appear in the LCD window, as shown
below:
Annunciation
CAM 000 1ST 2ND 3RD
MON 01
Figure 20: Normal Operating Display with Annunciation
ANNUNCIATION? NO
0=NO 1=YES SEQ=NEXT
Figure 19: Annunciation Display
Monitor Offset
Step 11)
The default program for the keypad dictates that the selected monitor number will
correspond to the number of the matrix switcher output to which it is connected.
For example, if Monitor 12 appears in the keypads display window and a camera
selection is made, the monitor that is connected to output 12 of the matrix switcher
will switch to that camera.
Figure 18: Monitor Offset Display
MONITOR OFFSET
NUMBER? 00 SEQ=NEXT
